Hi Tim, On 2019-10-03 7:27 pm, Tim Harvey wrote:
On Fri, Mar 1, 2019 at 11:21 AM Douglas Anderson <[email protected]> wrote:If you're bisecting why your peripherals stopped working, it's probably this CL. Specifically if you see this in your dmesg: Unexpected global fault, this could be serious ...then it's almost certainly this CL. Running your IOMMU-enabled peripherals with the IOMMU in bypass mode is insecure and effectively disables the protection they provide. There are few reasons to allow unmatched stream bypass, and even fewer good ones. This patch starts the transition over to make it much harder to run your system insecurely. Expected steps: 1. By default disable bypass (so anyone insecure will notice) but make it easy for someone to re-enable bypass with just a KConfig change. That's this patch. 2. After people have had a little time to come to grips with the fact that they need to set their IOMMUs properly and have had time to dig into how to do this, the KConfig will be eliminated and bypass will simply be disabled. Folks who are truly upset and still haven't fixed their system can either figure out how to add 'arm-smmu.disable_bypass=n' to their command line or revert the patch in their own private kernel. Of course these folks will be less secure. Suggested-by: Robin Murphy <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> ---Hi Doug / Robin, I ran into this breaking things on OcteonTx boards based on CN80XX CPU. The IOMMU configuration is a bit beyond me and I'm hoping you can offer some advice. The IOMMU here is cavium,smmu-v2 as defined in https://github.com/Gateworks/dts-newport/blob/master/cn81xx-linux.dtsi Booting with 'arm-smmu.disable_bypass=n' does indeed work around the breakage as the commit suggests. Any suggestions for a proper fix?
Ah, you're using the old "mmu-masters" binding (and in a way which isn't well-defined - it's never been specified what the stream ID argument(s) would mean for a PCI host bridge, and Linux just ignores them). The ideal thing would be to update the DT to generic "iommu-map" properties - it's been a long time since I last played with a ThunderX, but I believe the SMMU stream IDs should just be the same as the ITS device IDs (which is how the "mmu-masters" mapping would have played out anyway).
The arm-smmu driver support for the old binding has always relied on implicit bypass - there are technical reasons why we can't realistically support the full functionality offered to the generic bindings, but it would be possible to add some degree of workaround to prevent it interacting quite so poorly with disable_bypass, if necessary. Do you have deployed systems with DTs that can't be updated, but still might need to run new kernels?
Robin.
