Hi Eric,
在 2021/3/20 1:36, Auger Eric 写道:
Hi Chenxiang,
On 3/4/21 8:55 AM, chenxiang (M) wrote:
Hi Eric,
在 2021/2/24 4:56, Eric Auger 写道:
Implement domain-selective, pasid selective and page-selective
IOTLB invalidations.
Signed-off-by: Eric Auger <eric.au...@redhat.com>
---
v13 -> v14:
- Add domain invalidation
- do global inval when asid is not provided with addr
granularity
v7 -> v8:
- ASID based invalidation using iommu_inv_pasid_info
- check ARCHID/PASID flags in addr based invalidation
- use __arm_smmu_tlb_inv_context and __arm_smmu_tlb_inv_range_nosync
v6 -> v7
- check the uapi version
v3 -> v4:
- adapt to changes in the uapi
- add support for leaf parameter
- do not use arm_smmu_tlb_inv_range_nosync or arm_smmu_tlb_inv_context
anymore
v2 -> v3:
- replace __arm_smmu_tlb_sync by arm_smmu_cmdq_issue_sync
v1 -> v2:
- properly pass the asid
---
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 74 +++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 4c19a1114de4..df3adc49111c 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -2949,6 +2949,79 @@ static void arm_smmu_detach_pasid_table(struct
iommu_domain *domain)
mutex_unlock(&smmu_domain->init_mutex);
}
+static int
+arm_smmu_cache_invalidate(struct iommu_domain *domain, struct device *dev,
+ struct iommu_cache_invalidate_info *inv_info)
+{
+ struct arm_smmu_cmdq_ent cmd = {.opcode = CMDQ_OP_TLBI_NSNH_ALL};
+ struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+
+ if (smmu_domain->stage != ARM_SMMU_DOMAIN_NESTED)
+ return -EINVAL;
+
+ if (!smmu)
+ return -EINVAL;
+
+ if (inv_info->version != IOMMU_CACHE_INVALIDATE_INFO_VERSION_1)
+ return -EINVAL;
+
+ if (inv_info->cache & IOMMU_CACHE_INV_TYPE_PASID ||
+ inv_info->cache & IOMMU_CACHE_INV_TYPE_DEV_IOTLB) {
+ return -ENOENT;
+ }
+
+ if (!(inv_info->cache & IOMMU_CACHE_INV_TYPE_IOTLB))
+ return -EINVAL;
+
+ /* IOTLB invalidation */
+
+ switch (inv_info->granularity) {
+ case IOMMU_INV_GRANU_PASID:
+ {
+ struct iommu_inv_pasid_info *info =
+ &inv_info->granu.pasid_info;
+
+ if (info->flags & IOMMU_INV_ADDR_FLAGS_PASID)
+ return -ENOENT;
+ if (!(info->flags & IOMMU_INV_PASID_FLAGS_ARCHID))
+ return -EINVAL;
+
+ __arm_smmu_tlb_inv_context(smmu_domain, info->archid);
+ return 0;
+ }
+ case IOMMU_INV_GRANU_ADDR:
+ {
+ struct iommu_inv_addr_info *info = &inv_info->granu.addr_info;
+ size_t size = info->nb_granules * info->granule_size;
+ bool leaf = info->flags & IOMMU_INV_ADDR_FLAGS_LEAF;
+
+ if (info->flags & IOMMU_INV_ADDR_FLAGS_PASID)
+ return -ENOENT;
+
+ if (!(info->flags & IOMMU_INV_ADDR_FLAGS_ARCHID))
+ break;
+
+ arm_smmu_tlb_inv_range_domain(info->addr, size,
+ info->granule_size, leaf,
+ info->archid, smmu_domain);
Is it possible to add a check before the function to make sure that
info->granule_size can be recognized by SMMU?
There is a scenario which will cause TLBI issue: RIL feature is enabled
on guest but is disabled on host, and then on
host it just invalidate 4K/2M/1G once a time, but from QEMU,
info->nb_granules is always 1 and info->granule_size = size,
if size is not equal to 4K or 2M or 1G (for example size = granule_size
is 5M), it will only part of the size it wants to invalidate.
Do you have any idea about this issue?
I think maybe we can add a check here: if RIL is not enabled and also
size is not the granule_size (4K/2M/1G) supported by
SMMU hardware, can we just simply use the smallest granule_size
supported by hardware all the time?
+
+ arm_smmu_cmdq_issue_sync(smmu);
+ return 0;
+ }
+ case IOMMU_INV_GRANU_DOMAIN:
+ break;
I check the qemu code
(https://github.com/eauger/qemu/tree/v5.2.0-2stage-rfcv8), for opcode
CMD_TLBI_NH_ALL or CMD_TLBI_NSNH_ALL from guest OS
it calls smmu_inv_notifiers_all() to unamp all notifiers of all mr's,
but it seems not set event.entry.granularity which i think it should set
IOMMU_INV_GRAN_ADDR.
this is because IOMMU_INV_GRAN_ADDR = 0. But for clarity I should rather
set it explicitly ;-)
ok
BTW, for opcode CMD_TLBI_NH_ALL or CMD_TLBI_NSNH_ALL, it needs to unmap
size = 0x1000000000000 on 48bit system (it may spend much time), maybe
it is better
to set it as IOMMU_INV_GRANU_DOMAIN, then in host OS, send TLBI_NH_ALL
directly when IOMMU_INV_GRANU_DOMAIN.
Yes you're right. If the host does not support RIL then it is an issue.
This is going to be fixed in the next version.
Great
Thank you for the report!
Best Regards
Eric
+ default:
+ return -EINVAL;
+ }
+
+ /* Global S1 invalidation */
+ cmd.tlbi.vmid = smmu_domain->s2_cfg.vmid;
+ arm_smmu_cmdq_issue_cmd(smmu, &cmd);
+ arm_smmu_cmdq_issue_sync(smmu);
+ return 0;
+}
+
static bool arm_smmu_dev_has_feature(struct device *dev,
enum iommu_dev_features feat)
{
@@ -3048,6 +3121,7 @@ static struct iommu_ops arm_smmu_ops = {
.put_resv_regions = generic_iommu_put_resv_regions,
.attach_pasid_table = arm_smmu_attach_pasid_table,
.detach_pasid_table = arm_smmu_detach_pasid_table,
+ .cache_invalidate = arm_smmu_cache_invalidate,
.dev_has_feat = arm_smmu_dev_has_feature,
.dev_feat_enabled = arm_smmu_dev_feature_enabled,
.dev_enable_feat = arm_smmu_dev_enable_feature,
_______________________________________________
Linuxarm mailing list -- linux...@openeuler.org
To unsubscribe send an email to linuxarm-le...@openeuler.org
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
