On Tue, 2022-01-25 at 15:08 +0000, Mike Lothian wrote:
> Hi
>
> I'm seeing a WARNING that I think might be related to these patches,
> unfortunately another issue is making bisecting difficult
>
> [ 0.359362] AMD-Vi: X2APIC enabled
> [ 0.395140] ------------[ cut here ]------------
> [ 0.395142] WARNING: CPU: 0 PID: 1 at
> amd_iommu_enable_interrupts+0x1da/0x440
> [ 0.395146] Modules linked in:
> [ 0.395148] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-rc1-tip+ #2995
> [ 0.395150] Hardware name: ASUSTeK COMPUTER INC. ROG Strix
> G513QY_G513QY/G513QY, BIOS G513QY.316 11/29/2021
> [ 0.395152] RIP: 0010:amd_iommu_enable_interrupts+0x1da/0x440
> [ 0.395154] Code: 4b 38 48 89 41 18 b8 a0 86 01 00 0f 1f 44 00 00 48 8b 4b
> 38 8b 89 20 20 00 00 f7 c1 00 01 00 00 0f 85 7a fe ff ff ff c8 75 e6 <0f> 0b
> e9 6f fe ff ff 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00
> [ 0.395157] RSP: 0018:ffff88810022fc68 EFLAGS: 00010246
> [ 0.395158] RAX: 0000000000000000 RBX: ffff88810004b000 RCX:
> 0000000000000018
> [ 0.395160] RDX: 0000000000000008 RSI: ffff88810022fc70 RDI:
> ffffc900000800f0
> [ 0.395161] RBP: ffff88810022fc68 R08: ffff888100fce088 R09:
> 0000000000000000
> [ 0.395162] R10: 0000000000000000 R11: ffffffffffffffff R12:
> ffffffff7fffffff
> [ 0.395163] R13: 0000777f80000000 R14: 0000000000000000 R15:
> ffffffff8357c9e8
> [ 0.395165] FS: 0000000000000000(0000) GS:ffff888fde400000(0000)
> knlGS:0000000000000000
> [ 0.395166] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 0.395167] CR2: ffff88901e1ff000 CR3: 00000000b440c000 CR4:
> 0000000000150ef0
> [ 0.395169] Call Trace:
> [ 0.395170] <TASK>
> [ 0.395171] ? iommu_setup+0x29a/0x29a
> [ 0.395174] ? state_next+0x6e/0x1c9
> [ 0.395177] ? iommu_setup+0x29a/0x29a
> [ 0.395178] ? iommu_go_to_state+0x1f/0x33
> [ 0.395180] ? amd_iommu_init+0xa/0x23
> [ 0.395182] ? pci_iommu_init+0xf/0x45
> [ 0.395183] ? iommu_setup+0x29a/0x29a
> [ 0.395184] ?
> __initstub__kmod_pci_dma__250_136_pci_iommu_initrootfs+0x5/0x8
> [ 0.395186] ? do_one_initcall+0x100/0x290
> [ 0.395190] ? do_initcall_level+0x8b/0xe5
> [ 0.395192] ? do_initcalls+0x44/0x6d
> [ 0.395194] ? kernel_init_freeable+0xc7/0x10d
> [ 0.395196] ? rest_init+0xc0/0xc0
> [ 0.395198] ? kernel_init+0x11/0x150
> [ 0.395200] ? ret_from_fork+0x22/0x30
> [ 0.395201] </TASK>
> [ 0.395202] ---[ end trace 0000000000000000 ]---
> [ 0.395204] PCI-DMA: Using software bounce buffer
>
> Let me know if you need any more info
>
> Cheers
>
> Mike
Could you just apply these patches on top of 5.15 kernel and see if you get the
warning?
If something could case it is I think patch 1, it does move the GA log enabled
to be a bit later.
I also added few warnings there. I wonder why your dmesg quote doesn't contain
the C line
where the warning happens.
In partucular I added:
if (WARN_ON(status & (MMIO_STATUS_GALOG_RUN_MASK)))
That will fire if GA log is already running (maybe BIOS enabled it? - it really
shouldn't do that)
And that:
if (WARN_ON(i >= LOOP_TIMEOUT))
also should not happen and worth to be logged IMHO.
Best regards,
Maxim Levitsky
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
