On 07/04/2022 09:57, Yong Wu wrote:
Add a new flag NON_STD_AXI, All the previous SoC support this flag.
Prepare for adding infra and apu iommu which don't support this.
Signed-off-by: Yong Wu <yong...@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno
<angelogioacchino.delre...@collabora.com>
---
drivers/iommu/mtk_iommu.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 92f172a772d1..e7008a20ec74 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -122,6 +122,7 @@
#define IOVA_34_EN BIT(8)
#define SHARE_PGTABLE BIT(9) /* 2 HW share pgtable */
#define DCM_DISABLE BIT(10)
+#define NOT_STD_AXI_MODE BIT(11)
#define MTK_IOMMU_HAS_FLAG(pdata, _x) \
((((pdata)->flags) & (_x)) == (_x))
@@ -785,7 +786,8 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data
*data)
regval = 0;
} else {
regval = readl_relaxed(data->base + REG_MMU_MISC_CTRL);
- regval &= ~F_MMU_STANDARD_AXI_MODE_MASK;
+ if (MTK_IOMMU_HAS_FLAG(data->plat_data, NOT_STD_AXI_MODE))
+ regval &= ~F_MMU_STANDARD_AXI_MODE_MASK;
That means that for mt8195 infra we write back the very same value we read from
REG_MMU_MISC_CTRL. Is this necessary?
Maybe we can come up with a different flag called STD_AXI_MODE and use something
like
} else if (!MTK_IOMMU_HAS_FLAG(data->plat_data, \
STD_AXI_MODE)) {
Reason is that it makes more sense to add a flag for one specific iommu instead
of adding a flag to the common case (iommu is not following standard AXI protocol).
What do you think?
Regards,
Matthias
if (MTK_IOMMU_HAS_FLAG(data->plat_data, OUT_ORDER_WR_EN))
regval &= ~F_MMU_IN_ORDER_WR_EN_MASK;
}
@@ -1058,7 +1060,8 @@ static const struct dev_pm_ops mtk_iommu_pm_ops = {
static const struct mtk_iommu_plat_data mt2712_data = {
.m4u_plat = M4U_MT2712,
- .flags = HAS_4GB_MODE | HAS_BCLK | HAS_VLD_PA_RNG |
SHARE_PGTABLE,
+ .flags = HAS_4GB_MODE | HAS_BCLK | HAS_VLD_PA_RNG |
SHARE_PGTABLE |
+ NOT_STD_AXI_MODE,
.hw_list = &m4ulist,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
.iova_region = single_domain,
@@ -1068,7 +1071,8 @@ static const struct mtk_iommu_plat_data mt2712_data = {
static const struct mtk_iommu_plat_data mt6779_data = {
.m4u_plat = M4U_MT6779,
- .flags = HAS_SUB_COMM | OUT_ORDER_WR_EN | WR_THROT_EN,
+ .flags = HAS_SUB_COMM | OUT_ORDER_WR_EN | WR_THROT_EN |
+ NOT_STD_AXI_MODE,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
@@ -1077,7 +1081,7 @@ static const struct mtk_iommu_plat_data mt6779_data = {
static const struct mtk_iommu_plat_data mt8167_data = {
.m4u_plat = M4U_MT8167,
- .flags = RESET_AXI | HAS_LEGACY_IVRP_PADDR,
+ .flags = RESET_AXI | HAS_LEGACY_IVRP_PADDR | NOT_STD_AXI_MODE,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
@@ -1087,7 +1091,7 @@ static const struct mtk_iommu_plat_data mt8167_data = {
static const struct mtk_iommu_plat_data mt8173_data = {
.m4u_plat = M4U_MT8173,
.flags = HAS_4GB_MODE | HAS_BCLK | RESET_AXI |
- HAS_LEGACY_IVRP_PADDR,
+ HAS_LEGACY_IVRP_PADDR | NOT_STD_AXI_MODE,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
@@ -1106,7 +1110,7 @@ static const struct mtk_iommu_plat_data mt8183_data = {
static const struct mtk_iommu_plat_data mt8192_data = {
.m4u_plat = M4U_MT8192,
.flags = HAS_BCLK | HAS_SUB_COMM | OUT_ORDER_WR_EN |
- WR_THROT_EN | IOVA_34_EN,
+ WR_THROT_EN | IOVA_34_EN | NOT_STD_AXI_MODE,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
