From: Thierry Reding <tred...@nvidia.com>

Convert the Tegra host1x controller bindings from the free-form text
format to json-schema.

This also adds the missing display-hub DT bindings that were not
previously documented.

Reviewed-by: Rob Herring <r...@kernel.org>
Signed-off-by: Thierry Reding <tred...@nvidia.com>
---
 .../display/tegra/nvidia,tegra114-mipi.txt    |  41 --
 .../display/tegra/nvidia,tegra114-mipi.yaml   |  74 ++
 .../display/tegra/nvidia,tegra124-dpaux.yaml  | 149 ++++
 .../display/tegra/nvidia,tegra124-sor.yaml    | 206 ++++++
 .../display/tegra/nvidia,tegra124-vic.yaml    |  71 ++
 .../display/tegra/nvidia,tegra186-dc.yaml     |  85 +++
 .../tegra/nvidia,tegra186-display.yaml        | 310 ++++++++
 .../tegra/nvidia,tegra186-dsi-padctl.yaml     |  45 ++
 .../display/tegra/nvidia,tegra20-dc.yaml      | 181 +++++
 .../display/tegra/nvidia,tegra20-dsi.yaml     | 159 +++++
 .../display/tegra/nvidia,tegra20-epp.yaml     |  70 ++
 .../display/tegra/nvidia,tegra20-gr2d.yaml    |  73 ++
 .../display/tegra/nvidia,tegra20-gr3d.yaml    | 214 ++++++
 .../display/tegra/nvidia,tegra20-hdmi.yaml    | 126 ++++
 .../display/tegra/nvidia,tegra20-host1x.txt   | 675 ------------------
 .../display/tegra/nvidia,tegra20-host1x.yaml  | 347 +++++++++
 .../display/tegra/nvidia,tegra20-isp.yaml     |  67 ++
 .../display/tegra/nvidia,tegra20-mpe.yaml     |  73 ++
 .../display/tegra/nvidia,tegra20-tvo.yaml     |  58 ++
 .../display/tegra/nvidia,tegra20-vi.yaml      | 163 +++++
 .../display/tegra/nvidia,tegra210-csi.yaml    |  52 ++
 .../pinctrl/nvidia,tegra124-dpaux-padctl.txt  |  59 --
 22 files changed, 2523 insertions(+), 775 deletions(-)
 delete mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
 delete mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
 create mode 100644 
Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
 delete mode 100644 
Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt

diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt
deleted file mode 100644
index e4a25cedc5cf..000000000000
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-NVIDIA Tegra MIPI pad calibration controller
-
-Required properties:
-- compatible: "nvidia,tegra<chip>-mipi"
-- reg: Physical base address and length of the controller's registers.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - mipi-cal
-- #nvidia,mipi-calibrate-cells: Should be 1. The cell is a bitmask of the pads
-  that need to be calibrated for a given device.
-
-User nodes need to contain an nvidia,mipi-calibrate property that has a
-phandle to refer to the calibration controller node and a bitmask of the pads
-that need to be calibrated.
-
-Example:
-
-       mipi: mipi@700e3000 {
-               compatible = "nvidia,tegra114-mipi";
-               reg = <0x700e3000 0x100>;
-               clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
-               clock-names = "mipi-cal";
-               #nvidia,mipi-calibrate-cells = <1>;
-       };
-
-       ...
-
-       host1x@50000000 {
-               ...
-
-               dsi@54300000 {
-                       ...
-
-                       nvidia,mipi-calibrate = <&mipi 0x060>;
-
-                       ...
-               };
-
-               ...
-       };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
new file mode 100644
index 000000000000..d5ca8cf86e8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra114-mipi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra MIPI pad calibration controller
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^mipi@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra114-mipi
+      - nvidia,tegra210-mipi
+      - nvidia,tegra186-mipi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: mipi-cal
+
+  power-domains:
+    maxItems: 1
+
+  "#nvidia,mipi-calibrate-cells":
+    description: The number of cells in a MIPI calibration specifier.
+      Should be 1. The single cell specifies a bitmask of the pads that
+      need to be calibrated for a given device.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#nvidia,mipi-calibrate-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra114-car.h>
+
+    mipi@700e3000 {
+        compatible = "nvidia,tegra114-mipi";
+        reg = <0x700e3000 0x100>;
+        clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
+        clock-names = "mipi-cal";
+        #nvidia,mipi-calibrate-cells = <1>;
+    };
+
+    dsia: dsi@54300000 {
+        compatible = "nvidia,tegra114-dsi";
+        reg = <0x54300000 0x00040000>;
+        clocks = <&tegra_car TEGRA114_CLK_DSIA>,
+                 <&tegra_car TEGRA114_CLK_DSIALP>,
+                 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
+        clock-names = "dsi", "lp", "parent";
+        resets = <&tegra_car 48>;
+        reset-names = "dsi";
+        nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
new file mode 100644
index 000000000000..7df2b355b19b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-dpaux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra DisplayPort AUX Interface
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+description: |
+  The Tegra Display Port Auxiliary (DPAUX) pad controller manages two
+  pins which can be assigned to either the DPAUX channel or to an I2C
+  controller.
+
+  When configured for DisplayPort AUX operation, the DPAUX controller
+  can also be used to communicate with a DisplayPort device using the
+  AUX channel.
+
+properties:
+  $nodename:
+    pattern: "^dpaux@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-dpaux
+          - nvidia,tegra210-dpaux
+          - nvidia,tegra186-dpaux
+          - nvidia,tegra194-dpaux
+
+      - items:
+          - const: nvidia,tegra132-dpaux
+          - const: nvidia,tegra124-dpaux
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock input for the DPAUX hardware
+      - description: reference clock
+
+  clock-names:
+    items:
+      - const: dpaux
+      - const: parent
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dpaux
+
+  power-domains:
+    maxItems: 1
+
+  i2c-bus:
+    description: Subnode where I2C slave devices are listed. This
+      subnode must be always present. If there are no I2C slave
+      devices, an empty node should be added. See ../../i2c/i2c.yaml
+      for more information.
+    type: object
+
+  vdd-supply:
+    description: phandle of a supply that powers the DisplayPort
+      link
+
+patternProperties:
+  "^pinmux-[a-z0-9]+$":
+    description:
+      Since only three configurations are possible, only three child
+      nodes are needed to describe the pin mux'ing options for the
+      DPAUX pads. Furthermore, given that the pad functions are only
+      applicable to a single set of pads, the child nodes only need
+      to describe the pad group the functions are being applied to
+      rather than the individual pads.
+    type: object
+    properties:
+      groups:
+        const: dpaux-io
+
+      function:
+        enum:
+          - aux
+          - i2c
+          - off
+
+    additionalProperties: false
+
+    required:
+      - groups
+      - function
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dpaux: dpaux@545c0000 {
+        compatible = "nvidia,tegra210-dpaux";
+        reg = <0x545c0000 0x00040000>;
+        interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
+                 <&tegra_car TEGRA210_CLK_PLL_DP>;
+        clock-names = "dpaux", "parent";
+        resets = <&tegra_car 181>;
+        reset-names = "dpaux";
+        power-domains = <&pd_sor>;
+        status = "disabled";
+
+        state_dpaux_aux: pinmux-aux {
+            groups = "dpaux-io";
+            function = "aux";
+        };
+
+        state_dpaux_i2c: pinmux-i2c {
+            groups = "dpaux-io";
+            function = "i2c";
+        };
+
+        state_dpaux_off: pinmux-off {
+            groups = "dpaux-io";
+            function = "off";
+        };
+
+        i2c-bus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
new file mode 100644
index 000000000000..0188baad0865
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-sor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra SOR Output Encoder
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+description: |
+  The Serial Output Resource (SOR) can be used to drive HDMI, LVDS, eDP
+  and DP outputs.
+
+properties:
+  $nodename:
+    pattern: "^sor@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-sor
+          - nvidia,tegra210-sor
+          - nvidia,tegra210-sor1
+          - nvidia,tegra186-sor
+          - nvidia,tegra186-sor1
+          - nvidia,tegra194-sor
+
+      - items:
+          - const: nvidia,tegra132-sor
+          - const: nvidia,tegra124-sor
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 5
+    maxItems: 6
+
+  clock-names:
+    minItems: 5
+    maxItems: 6
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: sor
+
+  power-domains:
+    maxItems: 1
+
+  avdd-io-hdmi-dp-supply:
+    description: I/O supply for HDMI/DP
+
+  vdd-hdmi-dp-pll-supply:
+    description: PLL supply for HDMI/DP
+
+  hdmi-supply:
+    description: +5.0V HDMI connector supply
+
+  # Tegra186 and later
+  nvidia,interface:
+    description: index of the SOR interface
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: "/schemas/types.yaml#/definitions/uint8-array"
+
+  nvidia,panel:
+    description: phandle of a display panel
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  nvidia,xbar-cfg:
+    description: 5 cells containing the crossbar configuration.
+      Each lane of the SOR, identified by the cell's index, is
+      mapped via the crossbar to the pad specified by the cell's
+      value.
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+
+  # optional when driving an eDP output
+  nvidia,dpaux:
+    description: phandle to a DispayPort AUX interface
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-sor
+              - nvidia,tegra194-sor
+    then:
+      properties:
+        clocks:
+          items:
+            - description: clock input for the SOR hardware
+            - description: SOR output clock
+            - description: input for the pixel clock
+            - description: reference clock for the SOR clock
+            - description: safe reference clock for the SOR clock
+                during power up
+            - description: SOR pad output clock
+
+        clock-names:
+          items:
+            - const: sor
+            - enum:
+                - source # deprecated
+                - out
+            - const: parent
+            - const: dp
+            - const: safe
+            - const: pad
+    else:
+      properties:
+        clocks:
+          items:
+            - description: clock input for the SOR hardware
+            - description: SOR output clock
+            - description: input for the pixel clock
+            - description: reference clock for the SOR clock
+            - description: safe reference clock for the SOR clock
+                during power up
+
+        clock-names:
+          items:
+            - const: sor
+            - enum:
+                - source # deprecated
+                - out
+            - const: parent
+            - const: dp
+            - const: safe
+
+  - if:
+      not:
+        properties:
+          contains:
+            const: nvidia,panel
+    then:
+      required:
+        - hdmi-supply
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - avdd-io-hdmi-dp-supply
+  - vdd-hdmi-dp-pll-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sor0: sor@54540000 {
+        compatible = "nvidia,tegra210-sor";
+        reg = <0x54540000 0x00040000>;
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+                 <&tegra_car TEGRA210_CLK_SOR0_OUT>,
+                 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>,
+                 <&tegra_car TEGRA210_CLK_PLL_DP>,
+                 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
+        clock-names = "sor", "out", "parent", "dp", "safe";
+        resets = <&tegra_car 182>;
+        reset-names = "sor";
+        pinctrl-0 = <&state_dpaux_aux>;
+        pinctrl-1 = <&state_dpaux_i2c>;
+        pinctrl-2 = <&state_dpaux_off>;
+        pinctrl-names = "aux", "i2c", "off";
+        power-domains = <&pd_sor>;
+
+        avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+        vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
+        hdmi-supply = <&vdd_hdmi>;
+
+        nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+        nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1) GPIO_ACTIVE_LOW>;
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml
new file mode 100644
index 000000000000..37bb5ddc1963
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-vic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Image Composer
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^vic@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-vic
+          - nvidia,tegra210-vic
+          - nvidia,tegra186-vic
+          - nvidia,tegra194-vic
+
+      - items:
+          - const: nvidia,tegra132-vic
+          - const: nvidia,tegra124-vic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock input for the VIC hardware
+
+  clock-names:
+    items:
+      - const: vic
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: vic
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    description: Description of the interconnect paths for the VIC;
+      see ../interconnect/interconnect.txt for details.
+    items:
+      - description: memory read client for VIC
+      - description: memory write client for VIC
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+additionalProperties: false
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
new file mode 100644
index 000000000000..265a60d79d89
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) Display Controller
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^display@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-dc
+      - nvidia,tegra194-dc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: display controller pixel clock
+
+  clock-names:
+    items:
+      - const: dc
+
+  resets:
+    items:
+      - description: display controller reset
+
+  reset-names:
+    items:
+      - const: dc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    description: Description of the interconnect paths for the
+      display controller; see ../interconnect/interconnect.txt
+      for details.
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read-0
+      - const: read-1
+
+  nvidia,outputs:
+    description: A list of phandles of outputs that this display
+      controller can drive.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+
+  nvidia,head:
+    description: The number of the display controller head. This
+      is used to setup the various types of output to receive
+      video data from the given head.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - nvidia,outputs
+  - nvidia,head
+
+# see nvidia,tegra186-display.yaml for examples
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
new file mode 100644
index 000000000000..8c0231345529
--- /dev/null
+++ 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
@@ -0,0 +1,310 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) Display Hub
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^display-hub@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-display
+      - nvidia,tegra194-display
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  resets:
+    items:
+      - description: display hub reset
+      - description: window group 0 reset
+      - description: window group 1 reset
+      - description: window group 2 reset
+      - description: window group 3 reset
+      - description: window group 4 reset
+      - description: window group 5 reset
+
+  reset-names:
+    items:
+      - const: misc
+      - const: wgrp0
+      - const: wgrp1
+      - const: wgrp2
+      - const: wgrp3
+      - const: wgrp4
+      - const: wgrp5
+
+  power-domains:
+    maxItems: 1
+
+  ranges:
+    maxItems: 1
+
+patternProperties:
+  "^display@[0-9a-f]+$":
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-display
+    then:
+      properties:
+        clocks:
+          items:
+            - description: display core clock
+            - description: display stream compression clock
+            - description: display hub clock
+
+        clock-names:
+          items:
+            - const: disp
+            - const: dsc
+            - const: hub
+    else:
+      properties:
+        clocks:
+          items:
+            - description: display core clock
+            - description: display hub clock
+
+        clock-names:
+          items:
+            - const: disp
+            - const: hub
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    display-hub@15200000 {
+        compatible = "nvidia,tegra186-display";
+        reg = <0x15200000 0x00040000>;
+        resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP2>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP3>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP4>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP5>;
+        reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+                      "wgrp3", "wgrp4", "wgrp5";
+        clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_DISP>,
+                 <&bpmp TEGRA186_CLK_NVDISPLAY_DSC>,
+                 <&bpmp TEGRA186_CLK_NVDISPLAYHUB>;
+        clock-names = "disp", "dsc", "hub";
+        status = "disabled";
+
+        power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x15200000 0x15200000 0x40000>;
+
+        display@15200000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15200000 0x10000>;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD0>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+            nvidia,head = <0>;
+        };
+
+        display@15210000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15210000 0x10000>;
+            interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD1>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+            nvidia,head = <1>;
+        };
+
+        display@15220000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15220000 0x10000>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD2>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&sor0 &sor1>;
+            nvidia,head = <2>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra194-mc.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    display-hub@15200000 {
+        compatible = "nvidia,tegra194-display";
+        reg = <0x15200000 0x00040000>;
+        resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP1>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP2>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP3>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP4>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP5>;
+        reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+                      "wgrp3", "wgrp4", "wgrp5";
+        clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>,
+                 <&bpmp TEGRA194_CLK_NVDISPLAYHUB>;
+        clock-names = "disp", "hub";
+        status = "disabled";
+
+        power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x15200000 0x15200000 0x40000>;
+
+        display@15200000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15200000 0x10000>;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P0>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD0>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <0>;
+        };
+
+        display@15210000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15210000 0x10000>;
+            interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P1>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD1>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <1>;
+        };
+
+        display@15220000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15220000 0x10000>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P2>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD2>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <2>;
+        };
+
+        display@15230000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15230000 0x10000>;
+            interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P3>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD3>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <3>;
+        };
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
new file mode 100644
index 000000000000..e5a6145c8c53
--- /dev/null
+++ 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: 
http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dsi-padctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra MIPI DSI pad controller
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^padctl@[0-9a-f]+$"
+
+  compatible:
+    const: nvidia,tegra186-dsi-padctl
+
+  reg:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dsi
+
+allOf:
+  - $ref: "/schemas/reset/reset.yaml"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    padctl@15880000 {
+        compatible = "nvidia,tegra186-dsi-padctl";
+        reg = <0x15880000 0x10000>;
+        resets = <&bpmp TEGRA186_RESET_DSI>;
+        reset-names = "dsi";
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml
new file mode 100644
index 000000000000..ac346af663cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml
@@ -0,0 +1,181 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Display Controller
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^dc@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-dc
+          - nvidia,tegra30-dc
+          - nvidia,tegra114-dc
+          - nvidia,tegra124-dc
+          - nvidia,tegra210-dc
+
+      - items:
+          - const: nvidia,tegra124-dc
+          - const: nvidia,tegra132-dc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: display controller pixel clock
+      - description: parent clock # optional
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: dc
+      - const: parent # optional
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dc
+
+  interconnect-names: true
+  interconnects: true
+
+  iommus:
+    maxItems: 1
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  nvidia,head:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of the display controller head. This is used to 
setup the various
+      types of output to receive video data from the given head.
+
+  nvidia,outputs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A list of phandles of outputs that this display controller 
can drive.
+
+  rgb:
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-dc
+              - nvidia,tegra30-dc
+              - nvidia,tegra114-dc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: window A memory client
+            - description: window B memory client
+            - description: window B memory client (vertical filter)
+            - description: window C memory client
+            - description: cursor memory client
+
+        interconnect-names:
+          items:
+            - const: wina
+            - const: winb
+            - const: winb-vfilter
+            - const: winc
+            - const: cursor
+
+        rgb:
+          description: Each display controller node has a child node, named 
"rgb", that represents
+            the RGB output associated with the controller.
+          type: object
+          properties:
+            nvidia,ddc-i2c-bus:
+              $ref: /schemas/types.yaml#/definitions/phandle
+              description: phandle of an I2C controller used for DDC EDID 
probing
+
+            nvidia,hpd-gpio:
+              description: specifies a GPIO used for hotplug detection
+              maxItems: 1
+
+            nvidia,edid:
+              $ref: /schemas/types.yaml#/definitions/uint8-array
+              description: supplies a binary EDID blob
+
+            nvidia,panel:
+              $ref: /schemas/types.yaml#/definitions/phandle
+              description: phandle of a display panel
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra124-dc
+    then:
+      properties:
+        interconnects:
+          minItems: 4
+          items:
+            - description: window A memory client
+            - description: window B memory client
+            - description: window C memory client
+            - description: cursor memory client
+            - description: window D memory client
+            - description: window T memory client
+
+        interconnect-names:
+          minItems: 4
+          items:
+            - const: wina
+            - const: winb
+            - const: winc
+            - const: cursor
+            - const: wind
+            - const: wint
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dc@54200000 {
+        compatible = "nvidia,tegra20-dc";
+        reg = <0x54200000 0x00040000>;
+        interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_DISP1>;
+        clock-names = "dc";
+        resets = <&tegra_car 27>;
+        reset-names = "dc";
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
new file mode 100644
index 000000000000..75546f250ad7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Display Serial Interface
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-dsi
+          - nvidia,tegra30-dsi
+          - nvidia,tegra114-dsi
+          - nvidia,tegra124-dsi
+          - nvidia,tegra210-dsi
+          - nvidia,tegra186-dsi
+
+      - items:
+          - const: nvidia,tegra132-dsi
+          - const: nvidia,tegra124-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dsi
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    maxItems: 1
+
+  avdd-dsi-csi-supply:
+    description: phandle of a supply that powers the DSI controller
+
+  nvidia,mipi-calibrate:
+    description: Should contain a phandle and a specifier specifying
+      which pads are used by this DSI output and need to be
+      calibrated. See nvidia,tegra114-mipi.yaml for details.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: "/schemas/types.yaml#/definitions/uint8-array"
+
+  nvidia,panel:
+    description: phandle of a display panel
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  nvidia,ganged-mode:
+    description: contains a phandle to a second DSI controller to
+      gang up with in order to support up to 8 data lanes
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+allOf:
+  - $ref: "../dsi-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-dsi
+              - nvidia,tegra30-dsi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: DSI module clock
+            - description: input for the pixel clock
+
+        clock-names:
+          items:
+            - const: dsi
+            - const: parent
+    else:
+      properties:
+        clocks:
+          items:
+            - description: DSI module clock
+            - description: low-power module clock
+            - description: input for the pixel clock
+
+        clock-names:
+          items:
+            - const: dsi
+            - const: lp
+            - const: parent
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-dsi
+    then:
+      required:
+        - interrupts
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    dsi@15300000 {
+        compatible = "nvidia,tegra186-dsi";
+        reg = <0x15300000 0x10000>;
+        interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bpmp TEGRA186_CLK_DSI>,
+                 <&bpmp TEGRA186_CLK_DSIA_LP>,
+                 <&bpmp TEGRA186_CLK_PLLD>;
+        clock-names = "dsi", "lp", "parent";
+        resets = <&bpmp TEGRA186_RESET_DSI>;
+        reset-names = "dsi";
+
+        power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml
new file mode 100644
index 000000000000..0d55e6206b5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-epp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Encoder Pre-Processor
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^epp@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-epp
+      - nvidia,tegra30-epp
+      - nvidia,tegra114-epp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: epp
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    maxItems: 4
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    epp@540c0000 {
+        compatible = "nvidia,tegra20-epp";
+        reg = <0x540c0000 0x00040000>;
+        interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_EPP>;
+        resets = <&tegra_car 19>;
+        reset-names = "epp";
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml
new file mode 100644
index 000000000000..984a0de9b8a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA 2D graphics engine
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^gr2d@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-gr2d
+      - nvidia,tegra30-gr2d
+      - nvidia,tegra114-gr2d
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+      - description: memory client hotflush reset
+
+  reset-names:
+    items:
+      - const: 2d
+      - const: mc
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    maxItems: 4
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the HEG or core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gr2d@54140000 {
+        compatible = "nvidia,tegra20-gr2d";
+        reg = <0x54140000 0x00040000>;
+        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+        resets = <&tegra_car 21>;
+        reset-names = "2d";
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml
new file mode 100644
index 000000000000..4177d311899b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr3d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA 3D graphics engine
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^gr3d@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-gr3d
+      - nvidia,tegra30-gr3d
+      - nvidia,tegra114-gr3d
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    minItems: 2
+    maxItems: 4
+
+  reset-names:
+    minItems: 2
+    maxItems: 4
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  interconnects:
+    minItems: 4
+    maxItems: 10
+
+  interconnect-names:
+    minItems: 4
+    maxItems: 10
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    minItems: 1
+    maxItems: 2
+
+  power-domain-names:
+    minItems: 2
+    maxItems: 2
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra20-gr2d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+
+        clock-names:
+          items:
+            - const: 3d
+
+        resets:
+          items:
+            - description: module reset
+            - description: memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: mc
+
+        iommus:
+          maxItems: 1
+
+        interconnects:
+          minItems: 4
+          maxItems: 4
+
+        interconnect-names:
+          minItems: 4
+          maxItems: 4
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra30-gr3d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary module clock
+            - description: secondary module clock
+
+        clock-names:
+          items:
+            - const: 3d
+            - const: 3d2
+
+        resets:
+          items:
+            - description: primary module reset
+            - description: secondary module reset
+            - description: primary memory client hotflush reset
+            - description: secondary memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: 3d2
+            - const: mc
+            - const: mc2
+
+        iommus:
+          minItems: 2
+          maxItems: 2
+
+        interconnects:
+          minItems: 8
+          maxItems: 8
+
+        interconnect-names:
+          minItems: 8
+          maxItems: 8
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+            - description: phandle to the TD2 power domain
+
+        power-domain-names:
+          items:
+            - const: 3d0
+            - const: 3d1
+
+      dependencies:
+        power-domains: [ power-domain-names ]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra114-gr2d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+
+        clock-names:
+          items:
+            - const: 3d
+
+        resets:
+          items:
+            - description: module reset
+            - description: memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: mc
+
+        iommus:
+          maxItems: 1
+
+        interconnects:
+          minItems: 10
+          maxItems: 10
+
+        interconnect-names:
+          minItems: 10
+          maxItems: 10
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    gr3d@54180000 {
+        compatible = "nvidia,tegra20-gr3d";
+        reg = <0x54180000 0x00040000>;
+        clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+        resets = <&tegra_car 24>;
+        reset-names = "3d";
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
new file mode 100644
index 000000000000..035b9f1f2eb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra HDMI Output Encoder
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^hdmi@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-hdmi
+          - nvidia,tegra30-hdmi
+          - nvidia,tegra114-hdmi
+          - nvidia,tegra124-hdmi
+
+      - items:
+          - const: nvidia,tegra132-hdmi
+          - const: nvidia,tegra124-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+      - description: parent clock
+
+  clock-names:
+    items:
+      - const: hdmi
+      - const: parent
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: hdmi
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  hdmi-supply:
+    description: supply for the +5V HDMI connector pin
+
+  vdd-supply:
+    description: regulator for supply voltage
+
+  pll-supply:
+    description: regulator for PLL
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: "/schemas/types.yaml#/definitions/uint8-array"
+
+  nvidia,panel:
+    description: phandle of a display panel
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  "#sound-dai-cells":
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - pll-supply
+  - vdd-supply
+  - nvidia,ddc-i2c-bus
+  - nvidia,hpd-gpio
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+
+    hdmi@54280000 {
+        compatible = "nvidia,tegra124-hdmi";
+        reg = <0x54280000 0x00040000>;
+        interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+                 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+        clock-names = "hdmi", "parent";
+        resets = <&tegra_car 51>;
+        reset-names = "hdmi";
+
+        hdmi-supply = <&vdd_5v0_hdmi>;
+        pll-supply = <&vdd_hdmi_pll>;
+        vdd-supply = <&vdd_3v3_hdmi>;
+
+        nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+        nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
deleted file mode 100644
index e61999ce54e9..000000000000
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ /dev/null
@@ -1,675 +0,0 @@
-NVIDIA Tegra host1x
-
-Required properties:
-- compatible: "nvidia,tegra<chip>-host1x"
-- reg: Physical base address and length of the controller's registers.
-  For pre-Tegra186, one entry describing the whole register area.
-  For Tegra186, one entry for each entry in reg-names:
-    "vm" - VM region assigned to Linux
-    "hypervisor" - Hypervisor region (only if Linux acts as hypervisor)
-- interrupts: The interrupt outputs from the controller.
-- #address-cells: The number of cells used to represent physical base addresses
-  in the host1x address space. Should be 1.
-- #size-cells: The number of cells used to represent the size of an address
-  range in the host1x address space. Should be 1.
-- ranges: The mapping of the host1x address space to the CPU address space.
-- clocks: Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - host1x
-  - mc
-
-Optional properties:
-- operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandle to HEG or core power domain.
-
-For each opp entry in 'operating-points-v2' table of host1x and its modules:
-- opp-supported-hw: One bitfield indicating:
-       On Tegra20: SoC process ID mask
-       On Tegra30+: SoC speedo ID mask
-
-       A bitwise AND is performed against the value and if any bit
-       matches, the OPP gets enabled.
-
-Each host1x client module having to perform DMA through the Memory Controller
-should have the interconnect endpoints set to the Memory Client and External
-Memory respectively.
-
-The host1x top-level node defines a number of children, each representing one
-of the following host1x client modules:
-
-- mpe: video encoder
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-mpe"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - mpe
-
-  Optional properties:
-  - interconnects: Must contain entry for the MPE memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandle to MPE power domain.
-
-- vi: video input
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-vi"
-  - reg: Physical base address and length of the controller registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - Tegra20/Tegra30/Tegra114/Tegra124:
-    - resets: Must contain an entry for each entry in reset-names.
-      See ../reset/reset.txt for details.
-    - reset-names: Must include the following entries:
-      - vi
-  - Tegra210:
-    - power-domains: Must include venc powergate node as vi is in VE partition.
-
-  ports (optional node)
-  vi can have optional ports node and max 6 ports are supported. Each port
-  should have single 'endpoint' child node. All port nodes are grouped under
-  ports node. Please refer to the bindings defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt
-
-  csi (required node)
-  Tegra210 has CSI part of VI sharing same host interface and register space.
-  So, VI device node should have CSI child node.
-
-    - csi: mipi csi interface to vi
-
-      Required properties:
-      - compatible: "nvidia,tegra210-csi"
-      - reg: Physical base address offset to parent and length of the 
controller
-        registers.
-      - clocks: Must contain entries csi, cilab, cilcd, cile, csi_tpg clocks.
-        See ../clocks/clock-bindings.txt for details.
-      - power-domains: Must include sor powergate node as csicil is in
-        SOR partition.
-
-      channel (optional nodes)
-      Maximum 6 channels are supported with each csi brick as either x4 or x2
-      based on hw connectivity to sensor.
-
-      Required properties:
-      - reg: csi port number. Valid port numbers are 0 through 5.
-      - nvidia,mipi-calibrate: Should contain a phandle and a specifier
-        specifying which pads are used by this CSI port and need to be
-       calibrated. See also ../display/tegra/nvidia,tegra114-mipi.txt.
-
-      Each channel node must contain 2 port nodes which can be grouped
-      under 'ports' node and each port should have a single child 'endpoint'
-      node.
-
-        ports node
-        Please refer to the bindings defined in
-        Documentation/devicetree/bindings/media/video-interfaces.txt
-
-        ports node must contain below 2 port nodes.
-        port@0 with single child 'endpoint' node always a sink.
-        port@1 with single child 'endpoint' node always a source.
-
-        port@0 (required node)
-        Required properties:
-        - reg: 0
-
-         endpoint (required node)
-         Required properties:
-         - data-lanes: an array of data lane from 1 to 8. Valid array
-           lengths are 1/2/4/8.
-         - remote-endpoint: phandle to sensor 'endpoint' node.
-
-        port@1 (required node)
-        Required properties:
-        - reg: 1
-
-         endpoint (required node)
-         Required properties:
-         - remote-endpoint: phandle to vi port 'endpoint' node.
-
-  Optional properties:
-  - interconnects: Must contain entry for the VI memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandle to VENC power domain.
-
-- epp: encoder pre-processor
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-epp"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - epp
-
-  Optional properties:
-  - interconnects: Must contain entry for the EPP memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandle to HEG or core power domain.
-
-- isp: image signal processor
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-isp"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - isp
-
-  Optional properties:
-  - interconnects: Must contain entry for the ISP memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-  - power-domains: Phandle to VENC or core power domain.
-
-- gr2d: 2D graphics engine
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-gr2d"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - 2d
-    - mc
-
-  Optional properties:
-  - interconnects: Must contain entry for the GR2D memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandle to HEG or core power domain.
-
-- gr3d: 3D graphics engine
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-gr3d"
-  - reg: Physical base address and length of the controller's registers.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    (This property may be omitted if the only clock in the list is "3d")
-    - 3d
-      This MUST be the first entry.
-    - 3d2 (Only required on SoCs with two 3D clocks)
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - 3d
-    - 3d2 (Only required on SoCs with two 3D clocks)
-    - mc
-    - mc2 (Only required on SoCs with two 3D clocks)
-
-  Optional properties:
-  - interconnects: Must contain entry for the GR3D memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandles to 3D or core power domain.
-
-- dc: display controller
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-dc"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - dc
-      This MUST be the first entry.
-    - parent
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - dc
-  - nvidia,head: The number of the display controller head. This is used to
-    setup the various types of output to receive video data from the given
-    head.
-
-  Each display controller node has a child node, named "rgb", that represents
-  the RGB output associated with the controller. It can take the following
-  optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - interconnects: Must contain entry for the DC memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandle to core power domain.
-
-- hdmi: High Definition Multimedia Interface
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-hdmi"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - hdmi-supply: supply for the +5V HDMI connector pin
-  - vdd-supply: regulator for supply voltage
-  - pll-supply: regulator for PLL
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - hdmi
-      This MUST be the first entry.
-    - parent
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - hdmi
-
-  Optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-
-- tvo: TV encoder output
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-tvo"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-
-  Optional properties:
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandle to core power domain.
-
-- dsi: display serial interface
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-dsi"
-  - reg: Physical base address and length of the controller's registers.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - dsi
-      This MUST be the first entry.
-    - lp
-    - parent
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - dsi
-  - avdd-dsi-supply: phandle of a supply that powers the DSI controller
-  - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying
-    which pads are used by this DSI output and need to be calibrated. See also
-    ../display/tegra/nvidia,tegra114-mipi.txt.
-
-  Optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - nvidia,ganged-mode: contains a phandle to a second DSI controller to gang
-    up with in order to support up to 8 data lanes
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-
-- sor: serial output resource
-
-  Required properties:
-  - compatible: Should be:
-    - "nvidia,tegra124-sor": for Tegra124 and Tegra132
-    - "nvidia,tegra132-sor": for Tegra132
-    - "nvidia,tegra210-sor": for Tegra210
-    - "nvidia,tegra210-sor1": for Tegra210
-    - "nvidia,tegra186-sor": for Tegra186
-    - "nvidia,tegra186-sor1": for Tegra186
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - sor: clock input for the SOR hardware
-    - out: SOR output clock
-    - parent: input for the pixel clock
-    - dp: reference clock for the SOR clock
-    - safe: safe reference for the SOR clock during power up
-
-    For Tegra186 and later:
-    - pad: SOR pad output clock (on Tegra186 and later)
-
-    Obsolete:
-    - source: source clock for the SOR clock (obsolete, use "out" instead)
-
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - sor
-
-  Required properties on Tegra186 and later:
-  - nvidia,interface: index of the SOR interface
-
-  Optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - nvidia,xbar-cfg: 5 cells containing the crossbar configuration. Each lane
-    of the SOR, identified by the cell's index, is mapped via the crossbar to
-    the pad specified by the cell's value.
-
-  Optional properties when driving an eDP output:
-  - nvidia,dpaux: phandle to a DispayPort AUX interface
-
-- dpaux: DisplayPort AUX interface
-  - compatible : Should contain one of the following:
-    - "nvidia,tegra124-dpaux": for Tegra124 and Tegra132
-    - "nvidia,tegra210-dpaux": for Tegra210
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - dpaux: clock input for the DPAUX hardware
-    - parent: reference clock
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - dpaux
-  - vdd-supply: phandle of a supply that powers the DisplayPort link
-  - i2c-bus: Subnode where I2C slave devices are listed. This subnode
-    must be always present. If there are no I2C slave devices, an empty
-    node should be added. See ../../i2c/i2c.txt for more information.
-
-  See ../pinctrl/nvidia,tegra124-dpaux-padctl.txt for information
-  regarding the DPAUX pad controller bindings.
-
-- vic: Video Image Compositor
-  - compatible : "nvidia,tegra<chip>-vic"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - vic: clock input for the VIC hardware
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - vic
-
-  Optional properties:
-  - interconnects: Must contain entry for the VIC memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-Example:
-
-/ {
-       ...
-
-       host1x {
-               compatible = "nvidia,tegra20-host1x", "simple-bus";
-               reg = <0x50000000 0x00024000>;
-               interrupts = <0 65 0x04   /* mpcore syncpt */
-                             0 67 0x04>; /* mpcore general */
-               clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
-               resets = <&tegra_car 28>;
-               reset-names = "host1x";
-               operating-points-v2 = <&dvfs_opp_table>;
-               power-domains = <&domain>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               ranges = <0x54000000 0x54000000 0x04000000>;
-
-               mpe {
-                       compatible = "nvidia,tegra20-mpe";
-                       reg = <0x54040000 0x00040000>;
-                       interrupts = <0 68 0x04>;
-                       clocks = <&tegra_car TEGRA20_CLK_MPE>;
-                       resets = <&tegra_car 60>;
-                       reset-names = "mpe";
-                       operating-points-v2 = <&dvfs_opp_table>;
-                       power-domains = <&domain>;
-               };
-
-               vi@54080000 {
-                       compatible = "nvidia,tegra210-vi";
-                       reg = <0x0 0x54080000 0x0 0x700>;
-                       interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-                       assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
-                       assigned-clock-parents = <&tegra_car 
TEGRA210_CLK_PLL_C4_OUT0>;
-                       operating-points-v2 = <&dvfs_opp_table>;
-
-                       clocks = <&tegra_car TEGRA210_CLK_VI>;
-                       power-domains = <&pd_venc>;
-
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       ranges = <0x0 0x0 0x54080000 0x2000>;
-
-                       ports {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-
-                               port@0 {
-                                       reg = <0>;
-                                       imx219_vi_in0: endpoint {
-                                               remote-endpoint = 
<&imx219_csi_out0>;
-                                       };
-                               };
-                       };
-
-                       csi@838 {
-                               compatible = "nvidia,tegra210-csi";
-                               reg = <0x838 0x1300>;
-                               assigned-clocks = <&tegra_car 
TEGRA210_CLK_CILAB>,
-                                                 <&tegra_car 
TEGRA210_CLK_CILCD>,
-                                                 <&tegra_car 
TEGRA210_CLK_CILE>,
-                                                 <&tegra_car 
TEGRA210_CLK_CSI_TPG>;
-                               assigned-clock-parents = <&tegra_car 
TEGRA210_CLK_PLL_P>,
-                                                        <&tegra_car 
TEGRA210_CLK_PLL_P>,
-                                                        <&tegra_car 
TEGRA210_CLK_PLL_P>;
-                               assigned-clock-rates = <102000000>,
-                                                      <102000000>,
-                                                      <102000000>,
-                                                      <972000000>;
-
-                               clocks = <&tegra_car TEGRA210_CLK_CSI>,
-                                        <&tegra_car TEGRA210_CLK_CILAB>,
-                                        <&tegra_car TEGRA210_CLK_CILCD>,
-                                        <&tegra_car TEGRA210_CLK_CILE>,
-                                        <&tegra_car TEGRA210_CLK_CSI_TPG>;
-                               clock-names = "csi", "cilab", "cilcd", "cile", 
"csi_tpg";
-                               power-domains = <&pd_sor>;
-
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-
-                               channel@0 {
-                                       reg = <0>;
-                                       nvidia,mipi-calibrate = <&mipi 0x001>;
-
-                                       ports {
-                                               #address-cells = <1>;
-                                               #size-cells = <0>;
-
-                                               port@0 {
-                                                       reg = <0>;
-                                                       imx219_csi_in0: 
endpoint {
-                                                               data-lanes = <1 
2>;
-                                                               remote-endpoint 
= <&imx219_out0>;
-                                                       };
-                                               };
-
-                                               port@1 {
-                                                       reg = <1>;
-                                                       imx219_csi_out0: 
endpoint {
-                                                               remote-endpoint 
= <&imx219_vi_in0>;
-                                                       };
-                                               };
-                                       };
-                               };
-                       };
-               };
-
-               epp {
-                       compatible = "nvidia,tegra20-epp";
-                       reg = <0x540c0000 0x00040000>;
-                       interrupts = <0 70 0x04>;
-                       clocks = <&tegra_car TEGRA20_CLK_EPP>;
-                       resets = <&tegra_car 19>;
-                       reset-names = "epp";
-                       operating-points-v2 = <&dvfs_opp_table>;
-                       power-domains = <&domain>;
-               };
-
-               isp {
-                       compatible = "nvidia,tegra20-isp";
-                       reg = <0x54100000 0x00040000>;
-                       interrupts = <0 71 0x04>;
-                       clocks = <&tegra_car TEGRA20_CLK_ISP>;
-                       resets = <&tegra_car 23>;
-                       reset-names = "isp";
-               };
-
-               gr2d {
-                       compatible = "nvidia,tegra20-gr2d";
-                       reg = <0x54140000 0x00040000>;
-                       interrupts = <0 72 0x04>;
-                       clocks = <&tegra_car TEGRA20_CLK_GR2D>;
-                       resets = <&tegra_car 21>;
-                       reset-names = "2d";
-                       operating-points-v2 = <&dvfs_opp_table>;
-                       power-domains = <&domain>;
-               };
-
-               gr3d {
-                       compatible = "nvidia,tegra20-gr3d";
-                       reg = <0x54180000 0x00040000>;
-                       clocks = <&tegra_car TEGRA20_CLK_GR3D>;
-                       resets = <&tegra_car 24>;
-                       reset-names = "3d";
-                       operating-points-v2 = <&dvfs_opp_table>;
-                       power-domains = <&domain>;
-               };
-
-               dc@54200000 {
-                       compatible = "nvidia,tegra20-dc";
-                       reg = <0x54200000 0x00040000>;
-                       interrupts = <0 73 0x04>;
-                       clocks = <&tegra_car TEGRA20_CLK_DISP1>,
-                                <&tegra_car TEGRA20_CLK_PLL_P>;
-                       clock-names = "dc", "parent";
-                       resets = <&tegra_car 27>;
-                       reset-names = "dc";
-                       operating-points-v2 = <&dvfs_opp_table>;
-                       power-domains = <&domain>;
-
-                       interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>,
-                                       <&mc TEGRA20_MC_DISPLAY0B &emc>,
-                                       <&mc TEGRA20_MC_DISPLAY0C &emc>,
-                                       <&mc TEGRA20_MC_DISPLAYHC &emc>;
-                       interconnect-names = "wina",
-                                            "winb",
-                                            "winc",
-                                            "cursor";
-
-                       rgb {
-                               status = "disabled";
-                       };
-               };
-
-               dc@54240000 {
-                       compatible = "nvidia,tegra20-dc";
-                       reg = <0x54240000 0x00040000>;
-                       interrupts = <0 74 0x04>;
-                       clocks = <&tegra_car TEGRA20_CLK_DISP2>,
-                                <&tegra_car TEGRA20_CLK_PLL_P>;
-                       clock-names = "dc", "parent";
-                       resets = <&tegra_car 26>;
-                       reset-names = "dc";
-                       operating-points-v2 = <&dvfs_opp_table>;
-                       power-domains = <&domain>;
-
-                       interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>,
-                                       <&mc TEGRA20_MC_DISPLAY0BB &emc>,
-                                       <&mc TEGRA20_MC_DISPLAY0CB &emc>,
-                                       <&mc TEGRA20_MC_DISPLAYHCB &emc>;
-                       interconnect-names = "wina",
-                                            "winb",
-                                            "winc",
-                                            "cursor";
-
-                       rgb {
-                               status = "disabled";
-                       };
-               };
-
-               hdmi {
-                       compatible = "nvidia,tegra20-hdmi";
-                       reg = <0x54280000 0x00040000>;
-                       interrupts = <0 75 0x04>;
-                       clocks = <&tegra_car TEGRA20_CLK_HDMI>,
-                                <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
-                       clock-names = "hdmi", "parent";
-                       resets = <&tegra_car 51>;
-                       reset-names = "hdmi";
-                       status = "disabled";
-                       operating-points-v2 = <&dvfs_opp_table>;
-               };
-
-               tvo {
-                       compatible = "nvidia,tegra20-tvo";
-                       reg = <0x542c0000 0x00040000>;
-                       interrupts = <0 76 0x04>;
-                       clocks = <&tegra_car TEGRA20_CLK_TVO>;
-                       status = "disabled";
-                       operating-points-v2 = <&dvfs_opp_table>;
-               };
-
-               dsi {
-                       compatible = "nvidia,tegra20-dsi";
-                       reg = <0x54300000 0x00040000>;
-                       clocks = <&tegra_car TEGRA20_CLK_DSI>,
-                                <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
-                       clock-names = "dsi", "parent";
-                       resets = <&tegra_car 48>;
-                       reset-names = "dsi";
-                       status = "disabled";
-                       operating-points-v2 = <&dvfs_opp_table>;
-               };
-       };
-
-       ...
-};
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
new file mode 100644
index 000000000000..4fd513efb0f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
@@ -0,0 +1,347 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-host1x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra host1x controller
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+description: The host1x top-level node defines a number of children, each
+  representing one of the host1x client modules defined in this binding.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-host1x
+          - nvidia,tegra30-host1x
+          - nvidia,tegra114-host1x
+          - nvidia,tegra124-host1x
+          - nvidia,tegra210-host1x
+          - nvidia,tegra186-host1x
+          - nvidia,tegra194-host1x
+
+      - items:
+          - const: nvidia,tegra132-host1x
+          - const: nvidia,tegra124-host1x
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    items:
+      - description: host1x syncpoint interrupt
+      - description: host1x general interrupt
+    minItems: 1
+
+  interrupt-names:
+    items:
+      - const: syncpt
+      - const: host1x
+    minItems: 1
+
+  '#address-cells':
+    description: The number of cells used to represent physical base addresses
+      in the host1x address space.
+    enum: [1, 2]
+
+  '#size-cells':
+    description: The number of cells used to represent the size of an address
+      range in the host1x address space.
+    enum: [1, 2]
+
+  ranges:
+    maxItems: 1
+
+  clocks:
+    description: Must contain one entry, for the module clock. See
+      ../clocks/clock-bindings.txt for details.
+
+  clock-names:
+    items:
+      - const: host1x
+
+  resets:
+    minItems: 1 # MC reset is optional on Tegra186 and later
+    items:
+      - description: module reset
+      - description: memory client hotflush reset
+
+  reset-names:
+    minItems: 1 # MC reset is optional on Tegra186 and later
+    items:
+      - const: host1x
+      - const: mc
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory read client for host1x
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the HEG or core power domain
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties:
+  type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-host1x
+              - nvidia,tegra194-host1x
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: hypervisor
+            - const: vm
+
+        reg:
+          items:
+            - description: physical base address and length of the register
+                region assigned to the VM
+            - description: physical base address and length of the register
+                region used by the hypervisor
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          maxItems: 1
+
+      required:
+        - reg-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+
+    host1x@50000000 {
+        compatible = "nvidia,tegra20-host1x";
+        reg = <0x50000000 0x00024000>;
+        interrupts = <0 65 0x04   /* mpcore syncpt */
+                      0 67 0x04>; /* mpcore general */
+        interrupt-names = "syncpt", "host1x";
+        clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+        clock-names = "host1x";
+        resets = <&tegra_car 28>;
+        reset-names = "host1x";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x54000000 0x54000000 0x04000000>;
+
+        mpe@54040000 {
+            compatible = "nvidia,tegra20-mpe";
+            reg = <0x54040000 0x00040000>;
+            interrupts = <0 68 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_MPE>;
+            resets = <&tegra_car 60>;
+            reset-names = "mpe";
+        };
+
+        vi@54080000 {
+            compatible = "nvidia,tegra20-vi";
+            reg = <0x54080000 0x00040000>;
+            interrupts = <0 69 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_VI>;
+            resets = <&tegra_car 100>;
+            reset-names = "vi";
+        };
+
+        epp@540c0000 {
+            compatible = "nvidia,tegra20-epp";
+            reg = <0x540c0000 0x00040000>;
+            interrupts = <0 70 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_EPP>;
+            resets = <&tegra_car 19>;
+            reset-names = "epp";
+        };
+
+        isp@54100000 {
+            compatible = "nvidia,tegra20-isp";
+            reg = <0x54100000 0x00040000>;
+            interrupts = <0 71 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_ISP>;
+            resets = <&tegra_car 23>;
+            reset-names = "isp";
+        };
+
+        gr2d@54140000 {
+            compatible = "nvidia,tegra20-gr2d";
+            reg = <0x54140000 0x00040000>;
+            interrupts = <0 72 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+            resets = <&tegra_car 21>;
+            reset-names = "2d";
+        };
+
+        gr3d@54180000 {
+            compatible = "nvidia,tegra20-gr3d";
+            reg = <0x54180000 0x00040000>;
+            clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+            resets = <&tegra_car 24>;
+            reset-names = "3d";
+        };
+
+        dc@54200000 {
+            compatible = "nvidia,tegra20-dc";
+            reg = <0x54200000 0x00040000>;
+            interrupts = <0 73 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_DISP1>;
+            clock-names = "dc";
+            resets = <&tegra_car 27>;
+            reset-names = "dc";
+
+            rgb {
+            };
+        };
+
+        dc@54240000 {
+            compatible = "nvidia,tegra20-dc";
+            reg = <0x54240000 0x00040000>;
+            interrupts = <0 74 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_DISP2>;
+            clock-names = "dc";
+            resets = <&tegra_car 26>;
+            reset-names = "dc";
+
+            rgb {
+            };
+        };
+
+        hdmi@54280000 {
+            compatible = "nvidia,tegra20-hdmi";
+            reg = <0x54280000 0x00040000>;
+            interrupts = <0 75 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+                     <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+            clock-names = "hdmi", "parent";
+            resets = <&tegra_car 51>;
+            reset-names = "hdmi";
+
+            hdmi-supply = <&vdd_5v0_hdmi>;
+            pll-supply = <&vdd_hdmi_pll>;
+            vdd-supply = <&vdd_3v3_hdmi>;
+
+            nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+            nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+        };
+
+        tvo@542c0000 {
+            compatible = "nvidia,tegra20-tvo";
+            reg = <0x542c0000 0x00040000>;
+            interrupts = <0 76 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_TVO>;
+        };
+
+        dsi@54300000 {
+            compatible = "nvidia,tegra20-dsi";
+            reg = <0x54300000 0x00040000>;
+            clocks = <&tegra_car TEGRA20_CLK_DSI>,
+                     <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+            clock-names = "dsi", "parent";
+            resets = <&tegra_car 48>;
+            reset-names = "dsi";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra210-mc.h>
+
+    host1x@50000000 {
+        compatible = "nvidia,tegra210-host1x";
+        reg = <0x50000000 0x00024000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* mpcore syncpt */
+                     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* mpcore general */
+        interrupt-names = "syncpt", "host1x";
+        clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
+        clock-names = "host1x";
+        resets = <&tegra_car 28>;
+        reset-names = "host1x";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x54000000 0x54000000 0x01000000>;
+        iommus = <&mc TEGRA_SWGROUP_HC>;
+
+        vi@54080000 {
+            compatible = "nvidia,tegra210-vi";
+            reg = <0x54080000 0x00000700>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+            clocks = <&tegra_car TEGRA210_CLK_VI>;
+            power-domains = <&pd_venc>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            ranges = <0x0 0x54080000 0x2000>;
+
+            csi@838 {
+                compatible = "nvidia,tegra210-csi";
+                reg = <0x838 0x1300>;
+                assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+                                  <&tegra_car TEGRA210_CLK_CILCD>,
+                                  <&tegra_car TEGRA210_CLK_CILE>,
+                                  <&tegra_car TEGRA210_CLK_CSI_TPG>;
+                assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+                                         <&tegra_car TEGRA210_CLK_PLL_P>,
+                                         <&tegra_car TEGRA210_CLK_PLL_P>;
+                assigned-clock-rates = <102000000>,
+                                       <102000000>,
+                                       <102000000>,
+                                       <972000000>;
+
+                clocks = <&tegra_car TEGRA210_CLK_CSI>,
+                         <&tegra_car TEGRA210_CLK_CILAB>,
+                         <&tegra_car TEGRA210_CLK_CILCD>,
+                         <&tegra_car TEGRA210_CLK_CILE>,
+                         <&tegra_car TEGRA210_CLK_CSI_TPG>;
+                clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+                power-domains = <&pd_sor>;
+            };
+        };
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml
new file mode 100644
index 000000000000..3bc3b22e98e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra ISP processor
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-isp
+      - nvidia,tegra30-isp
+      - nvidia,tegra210-isp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: isp
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # write
+
+  power-domains:
+    items:
+      - description: phandle to the VENC or core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    isp@54100000 {
+        compatible = "nvidia,tegra20-isp";
+        reg = <0x54100000 0x00040000>;
+        interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_ISP>;
+        resets = <&tegra_car 23>;
+        reset-names = "isp";
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml
new file mode 100644
index 000000000000..4154ae01ad13
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-mpe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Encoder
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^mpe@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-mpe
+      - nvidia,tegra30-mpe
+      - nvidia,tegra114-mpe
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: mpe
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    minItems: 6
+    maxItems: 6
+
+  interconnect-names:
+    minItems: 6
+    maxItems: 6
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the MPE power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mpe@54040000 {
+        compatible = "nvidia,tegra20-mpe";
+        reg = <0x54040000 0x00040000>;
+        interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_MPE>;
+        resets = <&tegra_car 60>;
+        reset-names = "mpe";
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml
new file mode 100644
index 000000000000..467b015e5700
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-tvo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra TV Encoder Output
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^tvo@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-tvo
+      - nvidia,tegra30-tvo
+      - nvidia,tegra114-tvo
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tvo@542c0000 {
+        compatible = "nvidia,tegra20-tvo";
+        reg = <0x542c0000 0x00040000>;
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_TVO>;
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
new file mode 100644
index 000000000000..782a4b10150a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Input controller
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^vi@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra20-vi
+      - const: nvidia,tegra30-vi
+      - const: nvidia,tegra114-vi
+      - const: nvidia,tegra124-vi
+      - items:
+          - const: nvidia,tegra132-vi
+          - const: nvidia,tegra124-vi
+      - const: nvidia,tegra210-vi
+      - const: nvidia,tegra186-vi
+      - const: nvidia,tegra194-vi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: vi
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    minItems: 4
+    maxItems: 5
+
+  interconnect-names:
+    minItems: 4
+    maxItems: 5
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the VENC power domain
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+  avdd-dsi-csi-supply:
+    description: DSI/CSI power supply. Must supply 1.2 V.
+
+patternProperties:
+  "^csi@[0-9a-f]+$":
+    type: object
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-vi
+              - nvidia,tegra30-vi
+              - nvidia,tegra114-vi
+              - nvidia,tegra124-vi
+    then:
+      required:
+        - resets
+        - reset-names
+    else:
+      required:
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vi@54080000 {
+        compatible = "nvidia,tegra20-vi";
+        reg = <0x54080000 0x00040000>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_VI>;
+        resets = <&tegra_car 100>;
+        reset-names = "vi";
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vi@54080000 {
+        compatible = "nvidia,tegra210-vi";
+        reg = <0x54080000 0x00000700>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+        clocks = <&tegra_car TEGRA210_CLK_VI>;
+        power-domains = <&pd_venc>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x0 0x54080000 0x2000>;
+
+        csi@838 {
+            compatible = "nvidia,tegra210-csi";
+            reg = <0x838 0x1300>;
+            assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+                              <&tegra_car TEGRA210_CLK_CILCD>,
+                              <&tegra_car TEGRA210_CLK_CILE>,
+                              <&tegra_car TEGRA210_CLK_CSI_TPG>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+                                     <&tegra_car TEGRA210_CLK_PLL_P>,
+                                     <&tegra_car TEGRA210_CLK_PLL_P>;
+            assigned-clock-rates = <102000000>,
+                                   <102000000>,
+                                   <102000000>,
+                                   <972000000>;
+
+            clocks = <&tegra_car TEGRA210_CLK_CSI>,
+                     <&tegra_car TEGRA210_CLK_CILAB>,
+                     <&tegra_car TEGRA210_CLK_CILCD>,
+                     <&tegra_car TEGRA210_CLK_CILE>,
+                     <&tegra_car TEGRA210_CLK_CSI_TPG>;
+            clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+            power-domains = <&pd_sor>;
+        };
+    };
diff --git 
a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml 
b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
new file mode 100644
index 000000000000..fa07a40d1004
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra210-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra CSI controller
+
+maintainers:
+  - Thierry Reding <thierry.red...@gmail.com>
+  - Jon Hunter <jonath...@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^csi@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-csi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+      - description: A/B lanes clock
+      - description: C/D lanes clock
+      - description: E lane clock
+      - description: test pattern generator clock
+
+  clock-names:
+    items:
+      - const: csi
+      - const: cilab
+      - const: cilcd
+      - const: cile
+      - const: csi_tpg
+
+  power-domains:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+# see nvidia,tegra20-vi.yaml for an example
diff --git 
a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt 
b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt
deleted file mode 100644
index e0e886b73527..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Device tree binding for NVIDIA Tegra DPAUX pad controller
-========================================================
-
-The Tegra Display Port Auxiliary (DPAUX) pad controller manages two pins
-which can be assigned to either the DPAUX channel or to an I2C
-controller.
-
-This document defines the device-specific binding for the DPAUX pad
-controller. Refer to pinctrl-bindings.txt in this directory for generic
-information about pin controller device tree bindings. Please refer to
-the binding document ../display/tegra/nvidia,tegra20-host1x.txt for more
-details on the DPAUX binding.
-
-Pin muxing:
------------
-
-Child nodes contain the pinmux configurations following the conventions
-from the pinctrl-bindings.txt document.
-
-Since only three configurations are possible, only three child nodes are
-needed to describe the pin mux'ing options for the DPAUX pads.
-Furthermore, given that the pad functions are only applicable to a
-single set of pads, the child nodes only need to describe the pad group
-the functions are being applied to rather than the individual pads.
-
-Required properties:
-- groups: Must be "dpaux-io"
-- function: Must be either "aux", "i2c" or "off".
-
-Example:
---------
-
-       dpaux@545c0000 {
-               ...
-
-               state_dpaux_aux: pinmux-aux {
-                       groups = "dpaux-io";
-                       function = "aux";
-               };
-
-               state_dpaux_i2c: pinmux-i2c {
-                       groups = "dpaux-io";
-                       function = "i2c";
-               };
-
-               state_dpaux_off: pinmux-off {
-                       groups = "dpaux-io";
-                       function = "off";
-               };
-       };
-
-       ...
-
-       i2c@7000d100 {
-               ...
-               pinctrl-0 = <&state_dpaux_i2c>;
-               pinctrl-1 = <&state_dpaux_off>;
-               pinctrl-names = "default", "idle";
-       };
-- 
2.36.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Reply via email to