Tuomo Valkonen wrote: > On 2008-12-15 17:09 +0000, Tuomo Valkonen wrote: >>> resize commands. (E.g. I see only tab heading, but if I switch to that >>> heading and try to do ALT+K-V or even ALT+R-N, there's no reaction.) The >>> only way to unshrink it is to resize main frame. >> I may look into this more closely next year; now I have >> other things to concentrate on. > > Ok, attached is a patch that might help with the issue, also > available from the darcs repository. Please let me know if it > helps, so I can finally make the new maintenance release that's > been pending (getting through with PhD defence busyness).
Hi Tuomo, thanks for the patch. Unfortunately I still experience problems with frames getting stuck at 0 width or height after doing a 'Mod1-K V' or 'Mod1-K H' in a neighboring frame. Fortunately I can reproduce it reliably: 1) Start with a 'full' tiled workspace containing a single frame. 2) Mod1-S to do a vertical split 3) In the top frame repeated 'Mod1-K V' toggle the bottom frame from 0 height and then back to half the screen height, as expected. 4) Again in the top frame do a 'Mod1-K S' to do a horizontal split. 5) In one of the top frames do a 'Mod1-K V' to collapse the bottom frame. Then 'Mod1-TAB' to the other top frame and 'Mod1-K V'... the bottom frame unexpectedly stays at 0! (The same thing happens using 'Mod1-K H' in horizontal-split frames.) The key to reproducing the problem is to switch between maximized frames while the minimized frame is at 0 height/width, it then becomes impossible to resize the minimized frame from the keyboard. Let me know if you need a better description (or if I'm experiencing some user-error/misconception). - Chris Burkhardt
