Thank you for your suggestion!
Unfortunately, I noticed your email only after I finished fixing all
Speex-related errors by hand.
NOW IT WORKS!!!
Thank you for your help!
________________________________
From: Thilo Schulz <[email protected]>
To: Yasir I. Al-Dosary - zgzg2020™ <[email protected]>; Primary ioquake3
Discussion/Development list <[email protected]>
Sent: Wednesday, November 2, 2011 11:15 PM
Subject: Re: [ioquake3] How do I build ioquake3 on IBM PowerPC?
On Wednesday, 2. November 2011 06:33:43 Yasir I. Al-Dosary - zgzg2020™ wrote:
> I have an error:
> #error You now need to define either FIXED_POINT or FLOATING_POINT
ioquake3 uses libspeex for VoIP only. It's not a required feature anyways and
you can disable it. Create a file named "Makefile.local" and put the following
line into it:
USE_VOIP=0
Or alternatively use this:
USE_INTERNAL_SPEEX=0
but you'll need to install libspeex from your distribution in this case then.
--
Thilo Schulz
_______________________________________________
ioquake3 mailing list
[email protected]
http://lists.ioquake.org/listinfo.cgi/ioquake3-ioquake.org
By sending this message I agree to love ioquake3 and libsdl.
