Hi Philippe:
I am following this guide here.
https://www.iotivity.org/documentation/linux/programmers-guide
It says for CoAP based applications, only c-sdk is getting used, do we have
any sample applications based on this?
Thanks ,
Anil Kolli,
9886-595-440.
On 7 April 2015 at 15:43, anilkumar kolli <kollianil2009 at gmail.com> wrote:
> Hi Philippe:
>
> I am not familiar with c++ codes. Do we have simple c-code to do this job?
>
> Thanks ,
> Anil Kolli,
> 9886-595-440.
>
>
> On 7 April 2015 at 14:03, Philippe Coval <
> philippe.coval at open.eurogiciel.org> wrote:
>
>> On Tue, Apr 7, 2015 at 9:37 AM, anilkumar kolli <kollianil2009 at gmail.com>
>> wrote:
>> > Hello IoTivity:
>> >
>> > I build IoTivity-0.9.0 for ARM based board. I would like to make a
>> sample
>> > application to toggle LED from one board to other using 'simple
>> > server'/'simple client' applications available in 'examples'. Later I
>> would
>> > like to add 'sensor management' from server client.
>> >
>> > I would like to understand sources available. Is there any document
>> > available? To write new applications using the API's provided, is there
>> a
>> > API guide available?
>>
>> Hi
>>
>> You can use this minimal project as input :
>>
>> https://notabug.org/tizen/iotivity-example
>>
>> (I relocated it from gitorious)
>>
>> It uses mraa for mapping , but you can hardcode this it will work too
>>
>> I'll share a branch for atmel boards if needed
>>
>> unless someone can suggest other hardware adaptation
>> abstraction library for ARM ? or all arch ?
>>
>> Regards
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.iotivity.org/pipermail/iotivity-dev/attachments/20150407/a07a8555/attachment.html>
