Hello Ashok,
I appreciate the attention. I'm now developing this scenario with some changes in the architecture, under the iotivity release 1.1. The principal changes in the architecture scenario it's in the sensor endpoint. I change the hardware (arduino + module BLE) to an raspberry pi 3. Now I'm trying connect two raspberry (one raspberry pi will be the client and another raspberry pi will be the server) trough BLE connectivity. This is impossible? If yes what we need exactly to development? I already have the iotivity installed in the two raspberry pi 3 (S.O jessie) and i making crosscompile from ubuntu 14.04 (with eclipe ide c++ and yocto plugin). If someone can dispose some information/documentation i will be grateful. Many thanks in advance. *F?bio Lima* *Infotainment & Software* *Electronics, ITS and HMI Division * *fabio.barbosa at ctag.com <rocio.otero at ctag.com>* *CTAG ? Automotive Technology Centre of Galicia* 2016-03-17 7:53 GMT+01:00 ASHOKBABU CHANNA <ashok.channa at samsung.com>: > Hi F?bio Lima, > > > > Idea and setup looks promising... > > > > For your information, IoTivity supports IPv4/IPv6, BT and BLE connectivity > ?s on Linux/ Android /Tizen/ Arduino platforms. And it expects either > Rich/ Lite devices or client/server should have same connectivity for > communication. (You can use Routing if some devices have multiple > connectives.) > > > > In your scenario > > - What is the best option for my scenario? I need to have in each sensor > endpoint (module BLE + Arduino) an Iotivity SDK or it's possible just have > a Ioitivyty SDK for gateway (Raspberry PI)? > > *Yes each sensor endpoint (module BLE + Arduino) should have > Iotivity.* > > - How iotivity works for this scenario? - It's an "easy implementation"? > This is, Iotivity are defined to work with an endpoint sensor( BLE + > Arduino) and a gateway (raspberry pi + iotivity) ? > > *You can just download IoTivity from git and deploy on arduino board. You > don**?t require doing any other tasks.* > > > > I hope raspberry pi communicates with Arduino via BLE connectivity itself. > > > > I did not understand your comment: > > BLE + Arduino that captures the Bluetooth signal and send the information > "by zigbee" for an "intelligent gateway" that will be in this case a > Raspberry pi.? > > Do you mean intelligent gateway has Zigbee connectivity? > > > > Regards, > > Ashok > > ------- *Original Message* ------- > > *Sender* : F?bio Lima<fabio.barbosa at ctag.com> > > *Date* : Mar 16, 2016 18:20 (GMT+05:30) > > *Title* : [dev] Iotivity and BLE > > > Good afternoon, > > I'm looking a platform for an Industrial IoT implementation and at the > moment I'm testing some platforms, in which Iotivity platform is included. > > For example in the POC i designed the following scenarios: > > - Indoor Localization in a couple of spaces defined and something more > simple like an temperature and noise sensor. > > The hardware and protocols chosen for this scenarios it's essentially > arduino, raspberry pi, BLE, Zigbee, CoAP.. > > For the indoor localization the sensor endpoint will be composed by an > module BLE + Arduino that captures the Bluetooth signal and send the > information "by zigbee" for an "intelligent gateway" that will be in this > case an Raspberry pi. This raspberry Pi should be capable to management the > devices, management the information, rules engine, sent information for > cloud or local data-store, and others. The messaging for the the > applications will be trough the CoAP protocol. Basically that's it. > > In the way to understand better how the best way to integrate the Iotivity > platform in this scenario, I need your advices, if it's possible. > > - What is the best option for my scenario? I need to have in each sensor > endpoint (module BLE + Arduino) an Iotivity SDK or it's possible just have > a Ioitivyty SDK for gateway (Raspberry PI)? > > - How iotivity works for this scenario? - It's an "easy implementation"? > This is, Iotivity are defined to work with an endpoint sensor( BLE + > Arduino) and a gateway (raspberry pi + iotivity) ? > > Exist some example or documentation updated about an implementation of BLE > and with Zigbee? > > I have already installed the iotivi in a linux distribution. > > Many thanks in advance. > > *F?bio Lima* > > *Infotainment & Software* > > *Electronics, ITS and HMI Division * > > *fabio.barbosa at ctag.com <rocio.otero at ctag.com>* > > *CTAG ? Automotive Technology Centre of Galicia* > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.iotivity.org/pipermail/iotivity-dev/attachments/20160415/c67167ff/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: 201603171224848_EM6S04A2.gif Type: image/gif Size: 13168 bytes Desc: not available URL: <http://lists.iotivity.org/pipermail/iotivity-dev/attachments/20160415/c67167ff/attachment.gif>
