Thanks Geoffroy for the info. So, as far as I could understand from your replies and the initial reading of the readme file is that your BLE devices whether OCF/OIC (e.g. the sensor running zephyr with iotivity constrained) or GATT-based non-OIC, they are handled by the gateway device. The gateway will provide some "resource hosting" for the BLE devices to connect them with the rest of the system. All entities will talk with the gateway not to the BLE node itself even if BLE node is OCF/OIC. Is this correct?
I think this will make things a bit easier though not as flexible as in the case the gateway will route between the different transports. Also, the usage of simple node.js scripts instead of full-fledged resource container/bundle simplifies the handling of non-OIC devices. I will have a look at these. Best regards, Khaled On Tue, Jun 6, 2017 at 3:41 PM, VanCutsem, Geoffroy < geoffroy.vancutsem at intel.com> wrote: > Hi Khaled, > > > > You will find some input to some of your questions embedded below. > > > > *From:* iotivity-dev-bounces at lists.iotivity.org [mailto: > iotivity-dev-bounces at lists.iotivity.org] *On Behalf Of *Khaled Elsayed > *Sent:* Tuesday, June 6, 2017 9:59 AM > *To:* iotivity-dev <iotivity-dev at lists.iotivity.org> > *Subject:* [dev] Several Architectural Questions on Iotivity > > > > ?? > > Dear all, > > > > We are working on a research project called campie > http://campie.cu.edu.eg/ and have chosen iotivity/OIC as our base > connectivity and service discovery layer. I have several questions on > iotivity as I am trying to draft our platform architecture. Looking forward > to an exciting discussion. > > > > i) RD > > Is Iotivity RD fully compliant with the IETF RD > https://datatracker.ietf.org/doc/draft-ietf-core-resource-directory/. The > documentation is somewhat confusing. According to this > https://wiki.iotivity.org/resource_directory_-_programming_guide, it > looks more like IETF RD. However, according to this > https://wiki.iotivity.org/resource-directory_rd, iotivity RD is used to > provide "resource hosting" to support constrained devices with long > duty-cycle. I am inclined to think it can be used for both IETF-style RD > and then to host resources for those devices that need to save energy. It > is up to what is included in the code. Is this a correct conclusion? > > > > > > ii) Heterogeneous Networks > > Suppose we have the following network consisting of OIC servers on BLE > transport and 6owPAN/802.15.4, with an OIC client connected via the gateway > over Ethernet. > > > > [image: Inline image 1] > > > > [Geoffroy] We have a similar set-up in our IoT to Cloud Smart Home demo ( > https://01.org/smarthome (*) and https://github.com/01org/SmartHome-Demo). > More specifically, we have a Gateway that connects to BLE devices (both > 6LowPAN and GATT) and a separate Ethernet router that also acts as a WiFi > AP. So we have a mix of OCF servers that are connected via Ethernet, WiFi > and BLE (both 6LowPAN and GATT). > > > > (*) a little warning: our code base found in the Github repo has evolved > significantly since we wrote the tutorial so for accurate information, I?d > recommend reading the README.md files in our Github repository. We are in > the process of updating the tutorial but I do not have a firm schedule yet > > > > How can the Ethernet client discover: > > 1) 802.15.4: these are running IPv6 over 6LowPAN, routing between the > Ethernet and 15.4 can be achieved via the gateway. Should the gateway > forward the multicast requests between the two networks? What else is > needed? > > > > [Geoffroy] As part of our demo, we use Arduino 101 devices running the Zephyr > Project <https://www.zephyrproject.org/> and iotivity-constrained > <https://github.com/iotivity/iotivity-constrained>. These are native > OIC/OCF devices that communicate with the gateway over BLE (6LowPAN). There > is nothing specific in terms of routing that we do there. We have two > examples of such devices at the moment: > > 1. A temperature sensor (native OIC/OCF server): > https://github.com/01org/SmartHome-Demo/tree/master/ > sensors/ocf_temperature_sensor > > 2. A multisensor device: temperature, light, motion and LED . The > code is available here: https://github.com/01org/ > SmartHome-Demo/tree/master/sensors/ocf_multi_sensors > > > > 2) BLE: > > - If the OIC servers on BLE are using GATT-based OIC transport, what > does the gateway need to do enable the Ethernet OIC client to discover > those BLE devices? > > [Geoffroy] We have two examples of devices using BLE GATT to communicate > in our repo. > > 1. An environmental sensors [1] that communicates with our gateway > over BLE using GATT (Environmental Sensing Profile > <https://www.bluetooth.org/docman/handlers/downloaddoc.ashx?doc_id=294796>). > There is no OIC/OCF stack running on the device itself and but instead we > run a small app on the gateway (it is available here [2]) that exposes the > data transmitted over BLE GATT as if the device was an OIC/OCF server. This > small app is written in JavaScript (node.js) and its main dependencies are > ?noble? and ?iotivity-node?. It?s a very simple mechanism that works rather > well for us. > > 2. A Power Meter [3] that works very much the same way than the > environmental sensor except it uses a custom profile. Similarly, a simple > JS app [4] running on the gateway exposes that sensor as an OIC/OCF server > to the rest of the system. > > [1] https://github.com/01org/SmartHome-Demo/tree/master/ > sensors/environmental-sensors > > [2] https://github.com/01org/SmartHome-Demo/blob/master/ > ocf-servers/js-servers/environmental_sensor.js > > [3] https://github.com/01org/SmartHome-Demo/tree/master/ > sensors/DC_power_meter > > [4] https://github.com/01org/SmartHome-Demo/blob/master/ > ocf-servers/js-servers/power-uart.js > > - If the BLE nodes are also supporting IP service profile/6LowPAN, is > GATT-based OIC still needed or coap/udp over 6lowpan would be the way to > go? > > Also if these 802.15.4 or BLE devices want to discover and register with > an RD server on the Ethernet segment, what needs to be done? > > > > > > Finally, this one on non-OIC > > iii) Non-OIC Devices: According to the documentation of the resource > container https://wiki.iotivity.org/resource_container_-_ > programming_guide, sample application and bundles are available in the > examples folder. However, I cannot find them. I can only find same plugins > etc in the bridging folder. How can one build a full example with > implementation of resource container, bundle/plugins and configuration xml? > > > > Best regards > > > > Khaled > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.iotivity.org/pipermail/iotivity-dev/attachments/20170606/eb7fedd8/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.png Type: image/png Size: 31693 bytes Desc: not available URL: <http://lists.iotivity.org/pipermail/iotivity-dev/attachments/20170606/eb7fedd8/attachment.png>
