Hi, Jiong,
The patch looks great! I tested with a few bpf programs from
kernel:samples/bpf/ directory.
Your test case with verifier like input looks good. I will have a few
suggestions later.
I tested with compiler generated asm as well with both big endian and
little endian.
. clang generate .ll
. llc generate .asm
. llvm-mc generate .o
. llvm-objdump disassembles.
It works fine except in one case:
For ld_imm64, we have:
class LD_IMM64<bits<4> Pseudo, string OpcodeStr>
: InstBPF<(outs GPR:$dst), (ins u64imm:$imm),
"$dst "#OpcodeStr#" ${imm}ll",
[(set GPR:$dst, (i64 imm:$imm))]>
In reality, the map it tries to access will not be constant, so
the current assembler prints like:
r1 = <MCOperand Expr:(tx_port)>ll
The assembler does not like this and this insn is ignored.
If I change the above to
r1 = tx_port ll
as expressed in the test case, the code will be generated properly with
relocation record.
I guess, we may need to add something like LD_VAR_ADDR so that
the proper assembly code can be issued. Also we could drop "ll" with
"r1 = tx_port"?
Back to your test case bpf-insn-unit.s, you do not need add bpf in the file name
since it is already under BPF directory.
> r0 = *(u16 *)skb[2] // BPF_LD | BPF_ABS | BPF_H
> r0 = * (u32*)skb[4] // BPF_LD | BPF_ABS | BPF_W
could you add BPF_B test as well?
> r0 = * (u16 *)skb[r1] // BPF_LD | BPF_IND | BPF_H
> r0 = *(u32 *)skb[r2] // BPF_LD | BPF_IND | BPF_W
BPF_B test?
> r1 = 8589934591 ll // BPF_LD | BPF_DW | BPF_IMM
> r1 = dummy_map ll // Symbolic version
// ======== BPF_LDX Class ========
r5 = *(u8 *)(r0 + 0) // BPF_LDX | BPF_B
r6 = *(u16 *)(r1 + 8) // BPF_LDX | BPF_H
r7 = *(u32 *)(r2 + 16) // BPF_LDX | BPF_W
r8 = *(u64 *)(r3 - 30) // BPF_LDX | BPF_DW
// ======== TODO: BPF_ST Class =======
> There is no insn here, you can remove this line for now.
// ======== BPF_STX Class ========
*(u8 *)(r0 + 0) = r7 // BPF_STX | BPF_B
*(u16 *)(r1 + 8) = r8 // BPF_STX | BPF_H
*(u32 *)(r2 + 16) = r9 // BPF_STX | BPF_W
*(u64 *)(r3 - 30) = r10 // BPF_STX | BPF_DW
lock *(u32 *)(r2 + 16) += r9 // BPF_STX | BPF_W | BPF_XADD
lock *(u64 *)(r3 - 30) += r10 // BPF_STX | BPF_DW | BPF_XADD
// ======== BPF_JMP Class ========
goto Llabel0 // BPF_JA
if r0 == r1 goto Llabel0 // BPF_JEQ
if r1 > r2 goto Llabel0 // BPF_JGT
if r2 >= r3 goto Llabel0 // BPF_JGE
// TODO: BPF_JSET
> there is no BPF_JSET, you can remove this.
if r3 != r4 goto Llabel0 // BPF_JNE
if r4 s> r5 goto Llabel0 // BPF_JSGT
if r5 s>= r6 goto Llabel0 // BPF_JSGE
call 1 // BPF_CALL
exit // BPF_EXIT
if r6 < r7 goto Llabel0 // BPF_JLT
if r7 <= r8 goto Llabel0 // BPF_JLE
if r8 s< r9 goto Llabel0 // BPF_JSLT
if r9 s<= r10 goto Llabel0 // BPF_JSLE
> Could you add test compare register vs. imm?
// ======== BPF_ALU64 Class ========
r0 += r1 // BPF_ADD
r1 -= r2 // BPF_SUB
r2 *= r3 // BPF_MUL
r3 /= r4 // BPF_DIV
Llabel0:
r4 |= r5 // BPF_OR
r5 &= r6 // BPF_AND
r6 <<= r7 // BPF_LSH
r7 >>= r8 // BPF_RSH
// TODO: BPF_NEG
// TODO: BPF_MOD
> There is no BPF_NEG/MOD yet, you can remove these two lines.
r8 ^= r9 // BPF_XOR
r9 = r10 // BPF_MOV
r10 s>>= r0 // BPF_ARSH
> Could you add arith operations with register and imm. operands?
bswap16 r1 // BPF_END | BPF_TO_BE
bswap32 r2 // BPF_END | BPF_TO_BE
bswap64 r3 // BPF_END | BPF_TO_BE
// TODO: BPF_END | BPF_TO_LE
> There is no BPF_TO_LE yet, you can remove this line.
> Could you interleave the CHECK results with insn? This will be
clearer to do manual comparison.
On Thu, Sep 7, 2017 at 1:43 AM, Jiong Wang via iovisor-dev
<[email protected]> wrote:
> Hi,
>
> As discussed at threads:
>
> https://www.spinics.net/lists/xdp-newbies/msg00320.html
> https://www.spinics.net/lists/xdp-newbies/msg00323.html
>
> This patch adds the initial BPF AsmParser support in LLVM.
>
> This support is following the "verifier instruction format" which is
> C-like.
>
> Things need to mention are:
>
> 1. LLVM AsmParser doesn't expect the character "*" to be used as the
> start
> of a statement while BPF "verifier instruction format" is. So an new
> generic method "starIsStartOfStatement" is introduced.
>
> 2. As the MC assembler is sharing code infrastructure with disassembler,
> the
> current supported instruction format is *strictly* those registered
> in
> instruction information .td files. For example, the parser doesn't
> acccept "*(u8 *)(r0) = r7", instead, you need to write
> "*(u8 *)(r0 + 0) = r7". The offset is mandatory, even when it is
> zero.
> The instruction information .td files may need to register customized
> ParserMethods to allow more flexible syntaxes.
>
> The testcase bpf-insn-unit.s contains unit tests for supported syntaxes.
>
> Comments? Does the current accepted syntaxes look OK?
>
>
> _______________________________________________
> iovisor-dev mailing list
> [email protected]
> https://lists.iovisor.org/mailman/listinfo/iovisor-dev
>
_______________________________________________
iovisor-dev mailing list
[email protected]
https://lists.iovisor.org/mailman/listinfo/iovisor-dev
