Revision: 7662
http://sourceforge.net/p/ipcop/svn/7662
Author: owes
Date: 2014-09-30 13:37:17 +0000 (Tue, 30 Sep 2014)
Log Message:
-----------
Add lcp-echo-adaptive to ppp. In case link is 100% 'busy', echo may be lost
which is OK because the link is working (communicating). lcp-echo-adaptive
should handle such situations.
Modified Paths:
--------------
ipcop/trunk/src/rc.d/rc.red
Modified: ipcop/trunk/src/rc.d/rc.red
===================================================================
--- ipcop/trunk/src/rc.d/rc.red 2014-09-30 13:33:10 UTC (rev 7661)
+++ ipcop/trunk/src/rc.d/rc.red 2014-09-30 13:37:17 UTC (rev 7662)
@@ -669,7 +669,7 @@
'novjccomp',
'user', $pppsettings{'USERNAME'},
'lcp-echo-interval', '20',
- 'lcp-echo-failure', '3',
+ 'lcp-echo-failure', '3', 'lcp-echo-adaptive',
'lcp-max-configure', '50',
'maxfail', $pppsettings{'MAXRETRIES'}
)
@@ -715,7 +715,7 @@
'novjccomp',
'user', $pppsettings{'USERNAME'},
'lcp-echo-interval', '20',
- 'lcp-echo-failure', '3',
+ 'lcp-echo-failure', '3', 'lcp-echo-adaptive',
'lcp-max-configure', '50',
'maxfail', $pppsettings{'MAXRETRIES'}
)
@@ -783,7 +783,7 @@
'novj', 'novjccomp',
'user', $pppsettings{'USERNAME'},
'lcp-echo-interval', '20',
- 'lcp-echo-failure', '3',
+ 'lcp-echo-failure', '3', 'lcp-echo-adaptive',
'lcp-max-configure', '50',
'maxfail', $pppsettings{'MAXRETRIES'},
'sync'
@@ -901,7 +901,7 @@
'nobsdcomp', 'nodeflate',
'user', $pppsettings{'USERNAME'},
'lcp-echo-interval', '20',
- 'lcp-echo-failure', '3',
+ 'lcp-echo-failure', '3', 'lcp-echo-adaptive',
'lcp-max-configure', '50',
'maxfail', $pppsettings{'MAXRETRIES'}
)
@@ -978,7 +978,7 @@
'nobsdcomp', 'nodeflate',
'user', $pppsettings{'USERNAME'},
'lcp-echo-interval', '20',
- 'lcp-echo-failure', '3',
+ 'lcp-echo-failure', '3', 'lcp-echo-adaptive',
'lcp-max-configure', '50',
'maxfail', $pppsettings{'MAXRETRIES'}
)
@@ -1087,7 +1087,7 @@
'nodeflate',
'user', $pppsettings{'USERNAME'},
'lcp-echo-interval', '20',
- 'lcp-echo-failure', '3',
+ 'lcp-echo-failure', '3', 'lcp-echo-adaptive',
'lcp-max-configure', '50',
'maxfail', $pppsettings{'MAXRETRIES'}
)
@@ -1172,7 +1172,7 @@
'nobsdcomp', 'nodeflate',
'user', $pppsettings{'USERNAME'},
'lcp-echo-interval', '20',
- 'lcp-echo-failure', '3',
+ 'lcp-echo-failure', '3', 'lcp-echo-adaptive',
'lcp-max-configure', '50',
'maxfail', $pppsettings{'MAXRETRIES'}
)
This was sent by the SourceForge.net collaborative development platform, the
world's largest Open Source development site.
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
Ipcop-svn mailing list
Ipcop-svn@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipcop-svn
