Hi,
I want the exact command for generating UDP/IPv6, TCP/IPv6 traffic using
iperf 2.0.4.
currently the command i used is
iperf -s -V (in server side) -u -l 1450
iperf -c <inet6 address> -V (in client side) -u -l 1450
but it is not working, it is showing some error message and client is
stopped, that message is shown below
[r...@new-host-8 ~]# iperf -c fe80::216:17ff:feba:59e0 -u -i 1
write2 failed: Destination address required
------------------------------------------------------------
Client connecting to fe80::216:17ff:feba:59e0, UDP port 5001
Sending 1470 byte datagrams
UDP buffer size: 108 KByte (default)
------------------------------------------------------------
[ 3] local 0.0.0.0 port 0 connected with :: port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 0.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] Sent 0 datagrams
[ 3] WARNING: did not receive ack of last datagram after 10 tries.
kindly help me, i have to complete my work.
thanks in advance
Senthil.
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables unlimited
royalty-free distribution of the report engine for externally facing
server and web deployment.
http://p.sf.net/sfu/businessobjects
_______________________________________________
Iperf-users mailing list
Iperf-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/iperf-users
