Hi All,
I am using iperf in Windows XP PC. If I configure UDP traffic with data rate
100Mbps, it pumps only 67Mbps.
I dont know the reason behind this behavior.
Following is the PC configuration.
Windows - XP Professional (SP - 3)
Intel Pentium(R) 4 CPU 2.26 GHz
2.27 Ghz, 1.25GB0f RAM
Any help is highly appreciable.
Regards,
S. Senthil kumar
________________________________
SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary
or legally privileged information. In case you are not the original intended
Recipient of the message, you must not, directly or indirectly, use, disclose,
distribute, print, or copy any part of this message and you are requested to
delete it and inform the sender. Any views expressed in this message are those
of the individual sender unless otherwise stated. Nothing contained in this
message shall be construed as an offer or acceptance of any offer by Sasken
Communication Technologies Limited ("Sasken") unless sent with that express
intent and with due authority of Sasken. Sasken has taken enough precautions to
prevent the spread of viruses. However the company accepts no liability for any
damage caused by any virus transmitted by this email.
Read Disclaimer at http://www.sasken.com/extras/mail_disclaimer.html
------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Iperf-users mailing list
Iperf-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/iperf-users
