But your server's window size isn't 25 KB, is it?
Also, what is it in specific that you want to explain? I'm sorry I lost
track :P
On Sun, Oct 13, 2013 at 7:46 AM, <nkora...@tpg.com.au> wrote:
> Hi All,****
>
> ** **
>
> I was troubleshooting a throughput issue recently on an international
> 300Mbps link which had a RTT of ~160ms. ****
>
> ** **
>
> I have copied the output below from testing a single TCP session between
> two linux servers at either endpoint.****
>
> ** **
>
> I have the output from two tests from the perspective of SERVER_A (acting
> first in server mode and then in client mode). The remote server had
> similar output and same window sizes i.e. when in server mode it defaulted
> to 85.3 Kbytes and when in client mode defaulted to 25.3 Kbytes.****
>
> ** **
>
> ********************************************************
>
> SERVER MODE (receiving connection from remote server)****
>
> ********************************************************
>
> ** **
>
> [root@SERVER_A ~]# iperf -s -i 1****
>
> ------------------------------------------------------------****
>
> Server listening on TCP port 5001****
>
> TCP window size: 85.3 KByte (default)****
>
> ------------------------------------------------------------****
>
> [ 4] local 192.168.1.1 port 5001 connected with 192.168.2.1 port 46326***
> *
>
> [ ID] Interval Transfer Bandwidth****
>
> [ 4] 0.0- 1.0 sec 491 KBytes 4.02 Mbits/sec****
>
> [ 4] 1.0- 2.0 sec 3.79 MBytes 31.8 Mbits/sec****
>
> [ 4] 2.0- 3.0 sec 9.13 MBytes 76.6 Mbits/sec****
>
> [ 4] 3.0- 4.0 sec 9.01 MBytes 75.6 Mbits/sec****
>
> [ 4] 4.0- 5.0 sec 9.01 MBytes 75.6 Mbits/sec****
>
> [ 4] 5.0- 6.0 sec 10.1 MBytes 84.6 Mbits/sec****
>
> [ 4] 6.0- 7.0 sec 9.00 MBytes 75.5 Mbits/sec****
>
> [ 4] 7.0- 8.0 sec 9.13 MBytes 76.6 Mbits/sec****
>
> [ 4] 8.0- 9.0 sec 9.01 MBytes 75.6 Mbits/sec****
>
> [ 4] 9.0-10.0 sec 9.02 MBytes 75.7 Mbits/sec****
>
> [ 4] 0.0-10.2 sec 79.8 MBytes 65.6 Mbits/sec****
>
> ** **
>
> ********************************************************
>
> CLIENT MODE (sending data to remote server)****
>
> ********************************************************
>
> ** **
>
> [root@SERVER_A~]iperf -c 192.168.2.1****
>
> ------------------------------------------------------------****
>
> Client connecting to 192.168.2.1, TCP port 5001****
>
> TCP window size: 23.2 KByte (default)****
>
> ------------------------------------------------------------****
>
> [ 3] local 192.168.1.1 port 56806 connected with 192.168.2.1 port 5001***
> *
>
> [ ID] Interval Transfer Bandwidth****
>
> [ 3] 0.0-10.1 sec 116 MBytes 96.7 Mbits/sec****
>
> ** **
>
> ** **
>
> What I did not understand is how we were getting in excess of 65 Mbps
> using a single TCP session and default window size of 25.3 Kbytes.****
>
> ** **
>
> From my calculations ****
>
> ** **
>
> 1000ms/160ms = 6.25 window periods****
>
> 6.25 x window size (25.3Kbytes) = 158.125 Kbytes****
>
> multiplied by 8 to convert into Mbps is 1.265 Mbps****
>
> ** **
>
> Any ideas on how to explain the logic behind these results given the
> testing setup described above?****
>
> ** **
>
> Cheers****
>
>
> ------------------------------------------------------------------------------
> October Webinars: Code for Performance
> Free Intel webinars can help you accelerate application performance.
> Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most
> from
> the latest Intel processors and coprocessors. See abstracts and register >
> http://pubads.g.doubleclick.net/gampad/clk?id=60134071&iu=/4140/ostg.clktrk
> _______________________________________________
> Iperf-users mailing list
> Iperf-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/iperf-users
>
>
--
*Mohammad Hajjat*
*Ph.D. Student*
*Electrical and Computer Engineering*
*Purdue University*
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60134071&iu=/4140/ostg.clktrk
_______________________________________________
Iperf-users mailing list
Iperf-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/iperf-users
