I use -S 0xC0 for voice priority.  Also, 70Mbs is likely an unrealistic
voice rate.  A voice call uses ~200 byte payloads at ~8K.  Instead of
oversubscribing maybe just measure end/end latency and see if the
distribution shifts when the priority is applied.   with iperf 2.0.9 you
can get that output via -e  reports.

Bob

On Wed, Aug 3, 2016 at 1:10 AM, Erdenebayar Khuyagbaatar (OT) <
erdenebaya...@ot.mn> wrote:

> Dears,
>
>
>
> I’m trying to check if QoS prioritization is working with both
> Cisco/Ruckus wireless Access Points, by using iPerf.
>
>
>
> Access Point is providing 70mbps bandwidth, and I want to generate 2
> traffics (one for Voice, one for data) on iPerf, client PC are on 2
> different SSID from the test AP. Each Traffic should generate 70mbps load
> on AP, in result, I would like to see that Voice traffic is getting all or
> most of the bandwidth around 70mbps according to QoS setting on AP, and
> data traffic gets rest bandwidth, may be around 1 or 2 mbps. To create this
> test condition, what is right command on iPerf? Could you help me? My tried
> commands are as follow.
>
>
>
> Tried Case-1:
>
> 1.       Data Traffic
>
> Server Port 5201,
>
> -c 192.168.1.10 –p 5201 –t 1800
>
> 2.       Voice Traffic
>
> Server Port 5201,
>
>                 -c 192.168.1.12 –p 5201 –t 1800 –S 46
>
>
>
> Result : both traffic is getting 35mbps
>
>
>
> Tried Case-2:
>
> 1.       Data Traffic
>
> Server Port 5201,
>
> -c 192.168.1.10 –p 5201 –t 1800
>
> 2.       Voice Traffic
>
> Server Port 5201,
>
>                 -c 192.168.1.12 –p 5201 –t 1800 –S 0xB8
>
>
>
> Result : both traffic is getting 35mbps
>
>
>
> Tried Case-3:
>
> 1.       Data Traffic
>
> Server Port 5201,
>
> -c 192.168.1.10 –p 5201 –t 1800
>
> 2.       Voice Traffic
>
> Server Port 5201,
>
>                 -c 192.168.1.12 –u –p 5201 –t 1800 –S 46
>
>
>
> Tried Case-4:
>
> 1.       Data Traffic
>
> Server Port 5201,
>
> -c 192.168.1.10 –p 5201 –t 1800
>
> 2.       Voice Traffic
>
> Server Port 5201,
>
>                 -c 192.168.1.12 –u –p 5201 –t 1800 –S 0xB8
>
>
>
> Result : both traffic is getting 35mbps
>
>
>
>
>
> Regards,
> Erdenee
>
>
>
>
>
> |Supervisor RF Communications|Oyu Tolgoi|
>
> |Tel:+976 1133 1880 ext 7777|Fax:|Cell:+976 9901 2283|
>
> |EMAIL:erdenebaya...@ot.mn|
>
> P  Please consider the environment before printing this e-mail.
> ------------------------------
>
> This message contains confidential information from erdenebaya...@ot.mn.
> If you are not the intended recipient you are notified that disclosing,
> copying, distributing or taking any action in reliance on the contents of
> this information is strictly prohibited. E-mail transmission cannot be
> guaranteed to be secure or error-free as information could be intercepted,
> corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.
> The sender (erdenebaya...@ot.mn) therefore does not accept liability for
> any errors or omissions in the contents of this message, which arise as a
> result of e-mail transmission. If verification is required please request a
> hard-copy version.
> ------------------------------
>
>
>
>
>
>
>
> |Supervisor RF Communications|Oyu Tolgoi|
>
> |Tel:+976 1133 1880 ext 7777|Fax:|Cell:+976 9901 2283|
>
> |EMAIL:erdenebaya...@ot.mn|
>
> P  Please consider the environment before printing this e-mail.
> ------------------------------
>
> This message contains confidential information from erdenebaya...@ot.mn.
> If you are not the intended recipient you are notified that disclosing,
> copying, distributing or taking any action in reliance on the contents of
> this information is strictly prohibited. E-mail transmission cannot be
> guaranteed to be secure or error-free as information could be intercepted,
> corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.
> The sender (erdenebaya...@ot.mn) therefore does not accept liability for
> any errors or omissions in the contents of this message, which arise as a
> result of e-mail transmission. If verification is required please request a
> hard-copy version.
> ------------------------------
>
>
> ------------------------------------------------------------------------------
>
> _______________________________________________
> Iperf-users mailing list
> Iperf-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/iperf-users
>
>
------------------------------------------------------------------------------
_______________________________________________
Iperf-users mailing list
Iperf-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/iperf-users

Reply via email to