If you want to allow traffic from 129.94.162.0 and 129.94.163.0, why don't you try:
pass in on hme0 proto udp from 129.94.162.0/23 to any You say you want to allow machines on your LAN. What is the netmask for your LAN? I'm guessing it might be 129.94.162/23 or 129.94.162.0/255.255.254.0. This would mean a valid IP on your LAN would probably range from 129.94.162.1-129.94.163.254. If so, than the above syntax should work correctly. <> Jim -----Original Message----- Sorry if I wasn't too clear. The server that I want to show up on machines choosers is running ipfilter . I tried removing the keep state and allowing udp connections in: pass in quick on hme0 proto udp from any port = 177 to 129.94.163.184/32 pass out quick on hme0 proto udp from any to 129.94.163.184/32 port = 177 but it still didn't turn up on the chooser screens, however, if I went the whole hog and let any udp connections it would then broadcast and show up on peoples chooser screen. pass in on hme0 proto udp from any to any Can anyone suggest how I can control this a little better? That is how do I modify that line to say only machine on my LAN can connect to any udp port on my machine (Ie all machines in the networks 129.94.162.0 and 129.94.163.0)
