On Monday, Dec 8, 2003, at 19:12 Europe/Amsterdam, Max Clark wrote:


Hi all,

I am trying to configure freevrrpd on my freebsd/ipfilter boxes... how to I allow the following traffic? What port to I use in my ruleset?

Dec 8 10:10:18 fw2 ipmon[50]: 10:10:17.700526 6x fxp0 @200:20 b 216.193.195.34 -> 224.0.0.18 PR vrrp len 20 (40) IN
Dec 8 10:10:19 fw2 ipmon[50]: 10:10:18.710649 6x fxp0 @200:20 b 216.193.195.34 -> 224.0.0.18 PR vrrp len 20 (40) IN



vrrp is a seperate protocol, at the same level as tcp or udp, protocol number 112 accoring to my /etc/protocols.
You'll problaby need something like:


pass in on fxp0 proto vrrp from 216.193.195.34/32 to 224.0.0.18/32

Thanks in advance,
Max

--
Max Clark       maxc at beast.clarksys.com      http://www.clarksys.com

spamtrap: [EMAIL PROTECTED] - do NOT ever send email to this address <<

--
Met vriendelijke groeten,

Remco Post

SARA - Reken- en Netwerkdiensten                      http://www.sara.nl
High Performance Computing  Tel. +31 20 592 8008    Fax. +31 20 668 3167

"I really didn't foresee the Internet. But then, neither did the computer
industry. Not that that tells us very much of course - the computer industry
didn't even foresee that the century was going to end." -- Douglas Adams




Reply via email to