Quoting Darren Reed <[EMAIL PROTECTED]>:

> NAT *should* work (at least it was in the testing at Sun.)

Yes, I also found it quite surprising it does not, but I just couldn't make it
work :-(
Maybe they somehow broke it later?

I'm using a very basic NAT config (cable connection, private IP range for home
network).
The exact same config that worked litterally for years with 3.4.x, which is a
two-lines "map ..." straight out of the FAQ or the How-To, just plain doesn't work.
It's loaded without problem (no syntax error), but outgoing packets are not
NATed. They're just routed through. ipnat status says '0' everywhere.
I followed the instructions closely, updating the pfil.ap or iu.ap files,
checking with strconf, inserting with ifconfig, etc. Everything looked ok -
except no NAT.

Last time I had spent some time on it, in February, I had managed to get it work
for one machine, after upgrading to IPFilter 4.1next and with a one-to-one
mapping (I followed instructions posted by someone here, and, IIRC, he himself
had been told to do so by Casper Dik -- I might be wrong in my memories).
At the time, I hadn't understood that it was pfil 2.1.1 that was breaking IPv6,
so I hadn't spent much time on the older Sun IP Filter.

Sorry for not posting copy/paste of the stuff, I don't have the machine handy.

If there is anything specific you'd like to see, please ask. Even if it were not
the default with Solaris 10, I'd stick with IP Filter, so I want it to work. I
like it :-)

Laurent
-- 
A hundred thousand lemmings can't be wrong!

Reply via email to