Hi,

I recently installed FreeBSD 4.9 on my home firewall/server, and I'm using
the bundled ipfilter as firewall package of choice. However, I came across
a few oddities; maybe someone can shed some light on these ?

1) For active FTP to work, I noticed I have to specify the back-end
network, as well as the address of the server itself. I mean this most
elegant syntax

map em1 0/0 -> 0/32 proxy port ftp ftp/tcp

is supposed to work if I understood the FAQ correctly, but is does not.
This only works for FTP traffic originating from the firewall itself, but
not for hosts behind it. Instead I have to use this:

map em1 <extip>/32 -> 0/32 proxy port ftp ftp/tcp
map em1 192.168.2.0/24 -> 0/32 proxy port ftp ftp/tcp

2) The 0/32 syntax can apparently not be used in rdr rules. Is this
intentionally ? My external IP address gets assigned by DHCP, so I sort of
dislike the idea of hardcoding my current address in the firewall rules.

This doesn't seem to work, although the syntax is accepted:

rdr em1 0/32 port 6881 -> 192.168.2.1 port 6881 tcp

This does:

rdr em1 <extip>/32 port 6881 -> 192.168.2.1 port 6881 tcp

3) The same question applies to ipf syntax. Is there some shorthand for
the current address of an interface, like 0/32 exists for ipnat ?


regards,

Derkjan


Reply via email to