I did the same thing but I could get only 1 client conneted. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: "Eric V. Smith" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Wednesday, January 14, 2004 8:07 PM Subject: Re: IPFilter 3.4.33pre1, GRE/PPTP client behind firewall
> On Wed, Jan 14, 2004 at 07:05:39AM -0500, Eric V. Smith put into existance: > ] > ] > My laptop sends packets to the corporate VPN server (12.12.12.12) with > ] > protocol=47 (GRE), however Source IP=192.168.0.45, Dest IP=12.12.12.12. > ] > That's fine, except my Sun box continues to send that packet out the > ] > modem as Source=192.168.0.45, Dest=12.12.12.12 ! > ] > It does not rewrite the Source IP of the outbound GRE packet. Are there > ] > any rules I should add to enable this? > ] > ] .... > ] > ] > Also for the record, I have basic TCP/UDP NAT'ing for all boxes in my > ] > internal LAN, using the following IPNat rule: map sppp0 192.168.0.0/24 > ] > -> 0.0.0.0/32 portmap tcp/udp 20000:30000 > ] > ] You're not seeing the Sun box's address as the source address on the GRE > ] packets because you have no NAT rule for them. You're only NAT'ing TCP > ] and UDP, not GRE. > ] > ] I don't have a ipfilter box handy to check the exact syntax, but a NAT > ] rule such as: > ] map sppp0 192.168.0.0/24 -> 0.0.0.0 > ] should cause packets for all protocols to be NAT'd. I don't know if > ] there's a way to just specify GRE. > > Yep, this did the trick. I added this right after my tcp/udp rule and was able to > successfully > connect. > > Thank you VERY much! > Now I can continue learning more about the ins and outs of these rules :) > > ] > ] Eric. > ] > ] > ] > ] >
