Thanks for the help. I tried the those settings but they didn't seem to work. Perhaps I am not understanding the <IF> part of the command. netstat -i shows 2 entries:
lo0 8232 loopback localhost ... bge0 1500 machinename machinename ... I tried using both of these as the value for <IF> but the machine still didn't seem to forward the ports. I reloaded the file with the following commands: ipnat -C ipnat -f ipnat.conf Am I missing something? Brad Mann Software Engineer - Information Access Services HARRIS Corporation / GCSD (321) 984-6292 -----Original Message----- From: Flemming Laugaard [mailto:[EMAIL PROTECTED] Sent: Thursday, July 13, 2006 7:46 AM To: Mann, Bradley Cc: [email protected] Subject: Re: Easy port forwarding question >> Hello, >> >> I am extremely new to ipfilter/ipnat, and all I am attempting to >> accomplish is to have port 80 on a machine forward to its own port 8080. >> This command will need to be as generic as possible so that it can be >> deployed to other locations that have the same configuration but >> different IP address. >> > > ipnat: > rdr <IF> <SRVIP>/32 port 80 -> 127.0.0.1 port 8080 > > I can't do it more generic than this. You need to set both IP adresses. > But that could be solved by scripting :-) You could also try rdr <IF> 0.0.0.0/0 port 80 -> 127.0.0.1 port 8080 For redirecting anything going anywhere on <IF> port 80. I haven't tried it myself. Regards Flemming Laugaard
