Hello everyone.
I have been searching for a while on the net but have not found anything
similar to what i need.
I have a management server that must authenticate to a RADIUS server. When the
MGT sends the auth request, the RADIUS server answers in about 2 seconds. The
issue is that the MGT server will send a new request 1 second after the first
one, and the RADIUS server will not reply and block the address because it is
receiving 2 requests from the same server and it thinks there is a security
breach.
I thought I could use the --limit option on iptables (will allow the server to
send ONLY one request per second and block the rest), but i'm working on
Solaris, and what I found was ipfilter, not iptables. I have not, however, find
a similar option that limits the ammount of determinate packets on a time basis
(1 udp packet going to some port will pass only every 2 seconds)
Is there a feature that will support this?
thanks!
¿Tienes alguna duda en tu VIDA? www.howstuffworks.com If You Ask Me A
Fu**in' Question You'd Better Be Prepared For The Answer Noel Gallagher
Oasis Frontman 17/10/02
