Hello,
I've a SuperMicro X6DVA-EG MotherBoard, with the IPMI
controller AOC-IPMI20-E. I notice this errors:
With IPMITool I am not able to read the fans speed:
[EMAIL PROTECTED] ~]# ipmitool -I open sensor
Fan1 | 0x22 | discrete | 0xc0c0| na | na | na
| na | na | na
Fan2 | 0x20 | discrete | 0xc0c0| na | na | na
| na | na | na
Fan3 | 0x0 | discrete | 0xc0c0| na | na | na
| na | na | na
Fan4 | 0x9 | discrete | 0xc0c0| na | na | na
| na | na | na
Fan5 | 0x0 | discrete | 0xc0c0| na | na | na
| na | na | na
Fan6 | 0x0 | discrete | 0xc0c0| na | na | na
| na | na | na
But with ipmiutil,
000a SDR Full 01 2f 20 a 04 snum 09 Fan1 = 23 OK* 4725.00 RPM
000b SDR Full 01 2f 20 a 04 snum 0a Fan2 = 21 OK* 4455.00 RPM
000c SDR Full 01 2f 20 a 04 snum 0b Fan3 = 00 OK* 0.00 RPM
000d SDR Full 01 2f 20 a 04 snum 0c Fan4 = 09 OK* 1215.00 RPM
000e SDR Full 01 2f 20 a 04 snum 0d Fan5 = 00 OK* 0.00 RPM
000f SDR Full 01 2f 20 a 04 snum 0e Fan6 = 00 OK* 0.00 RPM
Yes. I'm wrong?
Thank you!
--
Massimiliano Masi
http://gauss.comunidelchianti.it/~max
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
