On Tue, Sep 05, 2006 at 06:28:31PM +0200, Olivier Archer wrote: > Daniel Toma wrote: > > Olivier Archer wrote: > > > >> I didn't fix manualy the ip addr, since bmclanconf -c 1 gave me one > >> by dhcp. what is this ip @ ? Is it the same as the network main iface > >> (eth0)? And i've said bmclanconf to configure channel 1, but how to deal > >> choosing channel number ? > >> so i've always got "Unable to establish LAN session" error. > >> > > > > I'm not sure, but in documentation for my device is written: > > "Please use an IP that is different from your system IP." > > > > ftp://ftp.supermicro.com/CDR-SIMIPMI_1.01_for_SIM_IPMI/Rev1.02_Beta/Manuals/Note-SIMSO.pdf > > > > > [reply-to set to list] > > Ok, I've set another IP address, tryed one local and one public. Both > are non pingable. Are they supposed to be ? do i have to add extra route ? > The only documention I read is README and manpages . Tha not a lot. Is > there other documentation/FAQ ?
Strange ... I got both a SIMSO+ and a SIMSO to test, and while I was able to ping (and connect to) the SIMSO+, I couldn't get in touch with the SIMSO (no plus). I used (DOS based) ipnmac to set and verify the IP and MAC addresses. No way. I'll return the non-plus one... There's a small chance that it doesn't have a proper firmware, but the LED is active so I guess the Linux on the ARM is running. No way to check though. Steffen ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
