Yes, KCS interrupt is working OK.
It looks like your board BIOS DMI table does not include any IRQ entry for KCS.
Run dmidecode command. You should have a Handle 0x002A (IPMI Device
Information). This will give you more information regarding the interface.
Does your board IPMC support interrupts?
Example of dmi table output for table IPMI Device Information
Handle 0x002A, DMI type 38, 18 bytes.
IPMI Device Information
Interface Type: KCS (Keyboard Control Style)
Specification Version: 1.5
I2C Slave Address: 0x42
NV Storage Device: Not Present
Base Address: 0x0000000000000CA2 (I/O)
Register Spacing: Successive Byte Boundaries
Interrupt Polarity: Active Low
Interrupt Trigger Mode: Edge
Interrupt Number: 11
Jean-Michel Audet
Kontron Canada
-----Message d'origine-----
De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Andrzej
Niemcewicz
Envoyé : Monday, December 04, 2006 12:57 PM
À : ipmitool-devel
Objet : [Ipmitool-devel] KCS with interrupts
Hi,
Was anyone able to enable interrupts on KCS interface (Open IPMI driver)?
When I send:
modprobe ipmi_si type=kcs irqs=9
after 'dmesg |grep ipmi' I get:
ipmi message handler version 33.11
ipmi_si: Found SMBIOS-specified state machine at I/O address 0xca2, slave addres
s 0x20
and 'cat /proc/ipmi/0/si_stats' shows:
interrupts_enabled: 0
Regards,
Andrzej
----------------------------------------------------
Komedia dla całej rodziny - "Wpuszczony w kanał" - nowa, rewelacyjna
animacja twórców "Shreka" i "Madagaskaru" w kinach od 1 grudnia!
http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fwkanal.html&sid=957
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
