Hi all,
I was about to commit a change impacting the output format of the
"ipmitool sdr -v" command.
But before I do so, I want to make sure nobody is going to get angry at me ...
The change is from :
Sensor ID : Temp CPU 0 Vcore (0x6)
Entity ID : 160.96 (PICMG Front Board)
Sensor Type (Analog) : Temperature
Sensor Reading : 33 (+/- 2) degrees C
Status : ok
Nominal Reading : 45.000
Normal Minimum : 10.000
Normal Maximum : 55.000
Positive Hysteresis : 2.000
Negative Hysteresis : 2.000
Minimum sensor range : Unspecified
Maximum sensor range : Unspecified
Event Message Control : Per-threshold
Readable Thresholds : lnr lcr lnc unc ucr unr
Settable Thresholds : lnr lcr lnc unc ucr unr
Threshold Read Mask : lnr lcr lnc unc ucr unr
Assertions Enabled : lnc- lcr- lnr- unc+ ucr+ unr+
Deassertions Enabled : lnc- lcr- lnr- unc+ ucr+ unr+
to
Sensor ID : Temp CPU 0 Vcore (0x6)
Entity ID : 160.96 (PICMG Front Board)
Sensor Type (Analog) : Temperature
Sensor Reading : 32 degrees C
Sensor Tolerance : +/- 2 degrees C
Sensor Accuracy : +/- 1%
Status : ok
Nominal Reading : 45.000
Normal Minimum : 10.000
Normal Maximum : 55.000
Positive Hysteresis : 2.000
Negative Hysteresis : 2.000
Minimum sensor range : Unspecified
Maximum sensor range : Unspecified
Event Message Control : Per-threshold
Readable Thresholds : lnr lcr lnc unc ucr unr
Settable Thresholds : lnr lcr lnc unc ucr unr
Threshold Read Mask : lnr lcr lnc unc ucr unr
Assertions Enabled : lnc- lcr- lnr- unc+ ucr+ unr+
Deassertions Enabled : lnc- lcr- lnr- unc+ ucr+ unr+
note that the tolerance is now on its own line, and the that accuracy (not
available before) as also been added
on its own line.
Do you think I should avoid changing the "Sensor Reading" line ? or do you
think the new format would be acceptable
for the users ?
thanks
Francois Isabelle
[EMAIL PROTECTED]
Concepteur de logiciel
Software designer
Kontron Canada
L'information contenue dans le présent document est la propriété de Kontron
Canada inc. et est divulguée en toute confidentialité. Cette information ne
doit pas être utilisée, divulguée à d'autres personnes ou reproduite sans le
consentement écrit explicite de Kontron Canada inc.
The information contained in this document is confidential and the sole
property of Kontron Canada Inc. It shall not be used, disclosed to others or
reproduced without the express written consent of Kontron Canada Inc.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Ipmitool-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
