hi,
I was using the KCS interface for some of my testing of my firmware ...
And found that the open interface checks whether the completion code is
0x00 and then only copies the reponse data correctly .. and if not then it
just leaves the way it is , by this the response data recieved to the
application side is not correct ...
In src/plugin/open/open.c line 269
if (rsp.ccode == 0 && rsp.data_len > 0) {
memmove(rsp.data, rsp.data + 1, rsp.data_len);
rsp.data[recv.msg.data_len] = 0;
}
I was expecting to recieve completion code other that 0x00 which was valid
in some case but this was giving a problem..
Instead of this we just need here this ..
if (rsp.data_len > 0) {
memmove(rsp.data, rsp.data + 1, rsp.data_len);
rsp.data[recv.msg.data_len] = 0;
}
Any way the upper layer always needs to check whether the completion code
is 0x00 or not ..So i guess it should be fine here doing this ..
Thanks,
Harshad Prabhu
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
