I think in my last email that I said that the data seems to be correct and ipmitool does not seem to be doing the right thing. I'd suggest doing a patch to ipmitool and submitting it to the mailing list.
-corey Amit Kumar wrote: > > > Hello Corey, > > I am sorry for late reply. I have pasted one of reply by you. > I was doing some investigation on DIMM SPDs and hardware topology. > Finally on one machine, I was successfully able to print DIMM sizes > and more information. Then after analyzing more on my target hardware > and reading your email more carefully, I had three questions/doubts - > > (a) You have mentioned that i need to have proper memory entities in > SDR. Do does it mean that if i am able to print all DIMM entity names > in FRU record, I have proper entities? (As i have given in the email > below). Am i right? > > (b) you mentioned that DIMM SPD need to be tied into BMC's I2C.For the > target hardware, which i am using, DIMM SPD is connected to BMC's I2C > bus, but not directly. The I2C bus for BMC goes through a Mux (PCA9548 > I2C switch). Is it possible to tell ipmitool somehow read DIMM SPD via > I2C switch? > > (c) I tried using Raw commands also in meantime (As per IPMI > specification v2.0). I can read Fan speed and sensor information > successfully but i fail to read DIMM information using Raw commands. > Any pointers in this direction? > > Thanks and Sorry for long email, > > Regards > Amit > ------------------------------------------------------------------------- SF.Net email is sponsored by: The Future of Linux Business White Paper from Novell. From the desktop to the data center, Linux is going mainstream. Let it simplify your IT future. http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
