Hi, I'm trying to set a few thresholds on a Dell PE1950 with ipmitool (unfortunately, it's not possible to set thresholds with freeipmi).
"sensor list" gives me the following output: Temp | -59.000 | degrees C | ok | na | na | na | 85.000 | 90.000 | na Temp | -58.000 | degrees C | ok | na | na | na | 85.000 | 90.000 | na Temp | 40.000 | degrees C | ok | -121.000 | 127.000 | na | na | na | na Temp | 40.000 | degrees C | ok | -121.000 | 127.000 | na | na | na | na Ambient Temp | 23.000 | degrees C | ok | na | 3.000 | 8.000 | 42.000 | 45.000 | na As you can see, I've got 4 sensors related to the CPU-Temperature (I'm using the first two). But how can I set different Thresholds for both sensors? With ipmitool [...] sensor thresh <id> [...], I can specify the sensor by name only, not by sensor-id. Is it possible? Best regards, Gregor -- Gregor Dschung System Life Guard, HiWi Fraunhofer-Institut für Techno- und Wirtschaftsmathematik ITWM Fraunhofer-Platz 1 D-67663 Kaiserslautern E-Mail: [EMAIL PROTECTED] Internet: www.itwm.fraunhofer.de ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
