Hi, i have a motherboard X5DP8-G2 with IPMI 1.5 (SBMC 1.02) the firmware revision of ipmi is 1.06.
when i use ipmiview to access the ipmi card through the network is ok when i use ipmitools to access the ipmi card through the network ( ipmitools -I lan -U ADMIN -P AMDIN -H my-ip-of-ipmi sensor for ex.) the ipmi card hangs and i need to reboot the server for access the ipmi card with ipmiview. ipmitool -vvv -I lan -U ADMIN -P ADMIN -H 10.0.254.90 sdr list Querying SDR for sensor list ipmi_lan_send_cmd:opened=[0], open=[134712496] IPMI LAN host 10.0.254.90 port 623 Sending IPMI/RMCP presence ping packet send_packet (12 bytes) 06 00 ff 06 00 00 11 be 80 00 00 00 ipmi_lan_send_cmd:opened=[1], open=[134712496] >> IPMI Request Session Header >> Authtype : NONE >> Sequence : 0x00000000 >> Session ID : 0x00000000 >> IPMI Request Message Header >> Rs Addr : 20 >> NetFn : 06 >> Rs LUN : 0 >> Rq Addr : 81 >> Rq Seq : 00 >> Rq Lun : 0 >> Command : 38 send_packet (23 bytes) 06 00 ff 07 00 00 00 00 00 00 00 00 00 09 20 18 c8 81 00 38 0e 04 35 send_packet (23 bytes) 06 00 ff 07 00 00 00 00 00 00 00 00 00 09 20 18 c8 81 00 38 0e 04 35 send_packet (23 bytes) 06 00 ff 07 00 00 00 00 00 00 00 00 00 09 20 18 c8 81 00 38 0e 04 35 send_packet (23 bytes) 06 00 ff 07 00 00 00 00 00 00 00 00 00 09 20 18 c8 81 00 38 0e 04 35 No response from remote controller Get Auth Capabilities command failed ipmi_lan_send_cmd:opened=[1], open=[134712496] >> IPMI Request Session Header >> Authtype : NONE >> Sequence : 0x00000000 >> Session ID : 0x00000000 >> IPMI Request Message Header >> Rs Addr : 20 >> NetFn : 06 >> Rs LUN : 0 >> Rq Addr : 81 >> Rq Seq : 01 >> Rq Lun : 0 >> Command : 38 send_packet (23 bytes) 06 00 ff 07 00 00 00 00 00 00 00 00 00 09 20 18 c8 81 04 38 0e 04 31 send_packet (23 bytes) 06 00 ff 07 00 00 00 00 00 00 00 00 00 09 20 18 c8 81 04 38 0e 04 31 send_packet (23 bytes) 06 00 ff 07 00 00 00 00 00 00 00 00 00 09 20 18 c8 81 04 38 0e 04 31 send_packet (23 bytes) 06 00 ff 07 00 00 00 00 00 00 00 00 00 09 20 18 c8 81 04 38 0e 04 31 No response from remote controller Get Auth Capabilities command failed Error: Unable to establish LAN session ipmi_lan_send_cmd failed to open intf Get Device ID command failed Unable to open SDR for reading with a ipmi card 2.0 is ok for ipmitools, ipmiview and ipmiutils I think ipmiview uses something other than ipmitools and that it works correctly with version 1.5. I want to be able to retrieve information from sensors throughout the network with the tool nagios (for ex.). if I use ipmitools locally on the server it works (motherboard X5DP8-G2 with IPMI 1.5 ) Thanks Patrick ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
