That's the latest i received from Tyan. If there is a newer version i dont
have it.
p.s. draining the power from the nodes for 30 seconds does reset the IPMI
cards and the functionality has returned.
p.p.s. doing that on a 500 node cluster sucked... :) or rather :(
On Fri, Jul 11, 2008 at 2:05 PM, Cress, Andrew R <[EMAIL PROTECTED]>
wrote:
> Is there a later BMC firmware revision beyond 0.26?
>
> Andy
>
> ------------------------------
> *From:* [EMAIL PROTECTED] [mailto:
> [EMAIL PROTECTED] *On Behalf Of *Michael Di
> Domenico
> *Sent:* Thursday, July 10, 2008 5:13 PM
> *To:* Ipmitool-devel@lists.sourceforge.net
> *Subject:* [Ipmitool-devel] odd ipmi card behavior
>
> Has anyone seen this behavior before from an IPMI card. We have 500
> machines all the same, with Tyan motherboards and IPMI cards.
> === ipmitool mc info
> Device ID : 32
> Device Revision : 0
> Firmware Revision : 0.26
> IPMI Version : 2.0
> Manufacturer ID : 6653
> Manufacturer Name : Tyan Computer Corporation
> Product ID : 2935 (0x0b77)
> Device Available : yes
> Provides Device SDRs : no
> Additional Device Support :
> Sensor Device
> SDR Repository Device
> SEL Device
> FRU Inventory Device
> IPMB Event Receiver
> IPMB Event Generator
> Bridge
> Aux Firmware Rev Info :
> 0x41
> 0x10
> 0x00
> 0x00
>
> For some reason, we're losing are ability to IPMI the machines from the LAN
> ports.
>
> If i run
>
> 'ipmitool chassis status' from the local machine, it works fine
>
> If i run
>
> 'ipmitool -A none -H <hostname> chassis status', it does not work and i get
> this output
>
> ipmi_lan_send_cmd:opened=[0], open=[4414400]
> IPMI LAN host 0.0.0.0 port 623
> Sending IPMI/RMCP presence ping packet
> ipmi_lan_send_cmd:opened=[1], open=[4414400]
> No response from remote controller
> Get Auth Capabilities command failed
> ipmi_lan_send_cmd:opened=[1], open=[4414400]
> No response from remote controller
> Get Auth Capabilities command failed
> Error: Unable to establish LAN session
> Failed to open LAN interface
> Error sending Chassis Status command
>
> No other output is logged to dmesg or /var/log/messages
>
> It all worked fine, but sporadically we're losing machines. The machines
> themselves are fine, just IPMI.
>
> We've tried 'ipmitool mc reset warm' and 'ipmitool mc reset cold', neither
> correct the issue, nor am i really sure they even did anything.
>
> Any advice is appreciated, thanks
>
>
>
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
