> > > Choi, Paul wrote: > > Hi, > > I am using one of the supermicro’s IPMI card and I am having some > problem. > > I am thinking this is problem with my network (too many arp message). > When I set the card with IP address, it won’t work until I power > recycle or until actually power cord off the server and put it back > on. I am thinking network is flooded with arp message and IPMI card’s > interface isn’t fast enough (supermicro said 400Kbs). If I ping > regular IP address in a NIC, it take about 0.1 ms. IPMI card’s IP > address takes about 150 ms. Also, I am getting kernel message said > “IPMI event message queue full. Incoming message discarded”. Is there > way to discard all messages but IPMI command on IPMI? Also, is there > way to see what’s in event queue? > The event queue is in the kernel, you have to use the local kernel device to get it. I don't think ipmitool will do this. You can use ipmitool to disble the "Event Message Buffer", however, and that will keep the BMC from sending events to the kernel.
-corey ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
