Quoting Mark Seger <[EMAIL PROTECTED]>: > I did discover the "ipmitool sdr get" command which the help says takes > an id as a target but when I tried it, it didn't work! First I did this > to get a list of IDs: > > [EMAIL PROTECTED] ~]# ipmitool sdr elist > UID Light | 01h | ok | 23.1 | 0 unspecified > Int. Health LED | 02h | ok | 23.2 | 0 unspecified > VRM 1 | 03h | lcr | 9.1 | 0 unspecified > VRM 2 | 04h | lcr | 9.2 | 0 unspecified > Temp 1 | 05h | ok | 7.1 | 47 degrees C > Temp 2 | 06h | ok | 3.1 | 34 degrees C > Temp 3 | 07h | ok | 3.2 | 30 degrees C > Temp 4 | 08h | ok | 3.3 | 30 degrees C > Temp 5 | 09h | ok | 3.4 | 32 degrees C > Temp 6 | 0Ah | ok | 3.5 | 30 degrees C > Temp 7 | 0Bh | ok | 3.6 | 30 degrees C > Temp 8 | 0Ch | ok | 8.1 | 57 degrees C > Temp 9 | 0Dh | ok | 39.1 | 24 degrees C > Virtual Fan | 0Eh | lnc | 7.2 | 37.24 unspecifi > Enclosure Status | 0Fh | ok | 23.3 | 0 unspecified > Power Meter | 10h | lcr | 7.3 | 204 Watts > > but when I did this, it didn't: > [EMAIL PROTECTED] ~]# ipmitool sdr get 10h > Unable to find sensor id '10h' >
Try ' ipmitool sdr get "Power Meter" ' Hope this helps, Carol ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
