DM,
You have IPMI LAN parameters set up fine apparently, but you will need to
configure the SOL parameters on the controlled computer.
I don’t think you can do this with ipmitool on Windows, since it does not
support any local Windows IPMI drivers for this.
However, ipmiutil supports the Intel Windows imbdrv.sys and the Microsoft
ipmidrv.sys.
See http://ipmiutil.sf.net and the UserGuide section 4.8 describes how to set
up SOL, since IPMI, BIOS and the OS all need to have parameters set up. Note
that Windows will only give you a SAC> prompt via Serial port or SOL.
Andy
From: DM [mailto:jiangs...@hotmail.com]
Sent: Thursday, February 26, 2009 10:33 PM
To: ipmitool-devel@lists.sourceforge.net
Subject: [Ipmitool-devel] how to set sol between two windows os ?
Hello, i am using a intell Power Edge 2950(with windows server 2003 OS) as an
controlled computer node, and i send the ipmitool cmd from a windows xp
remotely.
now , i can power on or off the controlled computer(intell Power Edge 2950)
successfully,
but, i couldn,t set up sol between the two ones.
what should be done on the controlled computer, what is needed done on the
controlling computer, and how to test the connection with the simplest command?
Any one can help me ? Thanks in advance~~
________________________________
MSN 9.0 正式版上线，捆绑免费25G网络硬盘！ 立刻下载！ <http://im.live.cn/msn9/>
The information contained in this document is CONFIDENTIAL and property of
Kontron. Any unauthorized review, use, disclosure or distribution is prohibited
without express written consent of Kontron. If you are not the intended
recipient, please contact the sender and destroy all copies of the original
message and enclosed attachments.
------------------------------------------------------------------------------
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
