It’s more complicated than you think, there isn’t one byte for severity.
There is a utility in ipmiutil that can do this for you, however (ievents): # 00 d4 01 d3 01 02 a0 68 d9 4b 20 00 04 07 69 85 01 ff ff # [ 16 bytes of the SEL entry ] # # ievents d3 01 02 a0 68 d9 4b 20 00 04 07 69 85 01 ff ff ievents version 2.63 RecId Date/Time_______ Source_ Evt_Type SensNum Evt_detail - Trig [Evt_data] 01d3 04/29/10 07:08:16 BMC 07 Processor #69 ProcErr Asserted 85 [01 ff ff] Andy From: Gnanasekar Loganathan [mailto:l.gnanase...@gmail.com] Sent: Thursday, May 06, 2010 4:17 AM To: Ipmitool-devel@lists.sourceforge.net Subject: [Ipmitool-devel] Reg: raw data, how to check the critical info - Email found in subject Hi All, I'm writing a small program to check critical level of information from the SEL record. What are all the bytes i need to check about critical information and severity information. sample raw data is, 00d401d30102a068d94b20000407698501ffff presently i getting this below error, may i know the reason please... Get SEL Info command failed: Command not supported in present state Thanks, Gnana
------------------------------------------------------------------------------
_______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
