Good evening ipmitool-devel,
I present myself I am Nicolas DLUBAK an administrator system and network for
the company PHOTOBOX.
At the moment I work on the project to monitor the status hardware on each
server. In this project I use the soft ipmitool (ipmitool version 1.8.8) in
the script.
On this script I need to clean just a line on the event log below.
Here is an example:
[#####]# ipmitool -c -I lan -H ipaddress -U login -P password sel list
1,Event Logging Disabled #0x72,Log area reset/cleared,Asserted
2,Pre-Init Time-stamp,,Power Supply #0x74,Redundancy Lost
3,Pre-Init Time-stamp,,Power Supply #0x65,Failure detected,Asserted
4,Pre-Init Time-stamp,,Power Supply #0x65,Power Supply AC lost,Asserted
And when I want to delete a line on this sel list it doesnt work at all.
[#####]# ipmitool -c -I lan -H ipaddress -U login -P password sel delete 3
Unable to delete entry 3: Invalid command
So of course I already looking for a solution by myself but I did not find
anything on INTERNET and also with my best colleague.
I will on top appreciate really your assistance because I cannot what make,
and it is a very important project for me and it is also a big issue for
infrastructure.
Thanks again in advance for your future help.
Best Regards
Nicolas DLUBAK
Administrateur Réseaux & Systèmes
E-mail
nicolas.dlu...@photobox.com
------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:
Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
