Hello, Thank you very much for your reply. This information is indeed very helpful.
Regards, Radu On 09/27/2010 11:47 PM, jordan_hargr...@dell.com wrote: > The PE1750 only supports IPMI 1.0, so does not have a LAN or LAN+ channel > (this only supported on IPMI 1.5+) > For legacy servers, you can see which version of IPMI is supported at: > http://linux.dell.com/ipmi.shtml > > --jordan hargrave > Dell Enterprise Linux Engineering > > > -----Original Message----- > From: Radu Gheorghiu [mailto:r...@pengooin.net] > Sent: Friday, September 17, 2010 9:54 AM > To: Andy Cress; ipmitool-devel@lists.sourceforge.net > Subject: Re: [Ipmitool-devel] IPMI on Dell PE-1750 > > Hello Andy, > > Thank you very much for your reply. Indeed i had great succes with > ipmiutil on Dell PE-1850, 1950, SC1425, However PE-1750 is a bit > strange. It appears it does not have a LAN channel. By checking > dmidecode, i find this: > IPMI Device Information > Interface Type: BT (Block Transfer) > Specification Version: 1.0 > I2C Slave Address: 0x10 > NV Storage Device: Not Present > Base Address: 0x00000000000000E4 (I/O) > Register Spacing: Successive Byte Boundaries > Interrupt Polarity: Active High > Interrupt Trigger Mode: Edge > Interrupt Number: a > > By issuing ipmiutil lan i get this output: > ipmiutil ver 2.69 > ilan ver 2.69 > -- BMC version 1.80, IPMI version 1.0 > This IPMI v1.0 system does not support PEF records. > This system does not support IPMI LAN channels. > > Could it be that PE-1750 does not have a LAN channel? I find it very > odd. > > Regards, > Radu > > > ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
