Danny, I finally got a chance to look into this and I found that there not any IPMI raw commands available to change the LOM from shared to dedicated on an HP Proliant system.
-- Jim Mankovich | jm...@hp.com -- On 3/20/2012 10:06 AM, i3D.net - Danny Nieuwenhuis wrote: > Hello All, > > I was wondering if anyone managed to change the LOM from shared to > dedicated using IPMITOOL on a HP system. > > I am able to proceed at a Dell system using the raw commands: > > To check if the current DRAC is "Shared with failover" or dedicated. > > ipmitool raw 0x30 0x25 > > A result of 00 means shared and 02 means dedicated. > > To change to shared: > > ipmitool raw 0x30 0x24 0 > > To change to dedicated: > > ipmitool raw 0x30 0x24 2 > ------------------------------------------------------------------------------ Better than sec? Nothing is better than sec when it comes to monitoring Big Data applications. Try Boundary one-second resolution app monitoring today. Free. http://p.sf.net/sfu/Boundary-dev2dev _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
