Hank, The ability to query the name is useful, but I don't really have a way to implement it or test it. If it's compatible with the spec (like you are using an OEM parameter and the set selector) it would be cool to implement. But I don't have access to the HPM.2 spec.
The IPMI 2.0 spec allows up to 15 serial ports, and there is no restriction on the maximum that may be open at any one time. I'm not sure I understand what you mean by mapping, but it sounds like HPM.2 might map the 255 possible into the 15 ones available? If so, I don't know how to do that. -corey On 03/22/2013 09:12 AM, Hank Bruning wrote: > Cory, > Just an idea. In PICMG HPM.2 we added that capability to use 255 > serial ports per IPM Controller and and can query the name of each. > Only 14(might be +1/-1) are allowed active per IPMI at one time. Maybe > the sytanx should allow for mapping X to Y where X is an active IPMI > SOL session(one of 14) and Y is one of the 255. > http://www.jblade.com/products/hemi/hpm2/sol/Hpm2SolOverview.jsf > Hank Bruning > > On Fri, Mar 22, 2013 at 9:40 AM, Corey Minyard <tcminy...@gmail.com > <mailto:tcminy...@gmail.com>> wrote: > > The SOL protocol supports multiple serial ports using the "instance", > allow this to be passed in to ipmitool. > > Index: doc/ipmitool.1 > =================================================================== > RCS file: /cvsroot/ipmitool/ipmitool/doc/ipmitool.1,v > retrieving revision 1.50 > diff -u -r1.50 ipmitool.1 > --- doc/ipmitool.1 5 Sep 2012 14:22:36 -0000 1.50 > +++ doc/ipmitool.1 22 Mar 2013 13:33:41 -0000 > @@ -2586,7 +2586,7 @@ > by the IPMI over serial channel. > .RE > .TP > -\fIactivate\fP [\fIusesolkeepalive\fP | \fInokeepalive\fP] > +\fIactivate\fP [\fIusesolkeepalive\fP | \fInokeepalive\fP] > [\fIinstance=<number>\fP] > .br > > Causes ipmitool to enter Serial Over LAN > @@ -2596,6 +2596,9 @@ > sent to the serial console on the remote server. > On exit,the the SOL payload mode is deactivated and > the terminal is reset to its original settings. > + > +If the instance is given, it will activate using the given instance > +number. The default is 1. > .RS > > Special escape sequences are provided to control the SOL session: > @@ -2617,7 +2620,7 @@ > Note that escapes are only recognized immediately after newline. > .RE > .TP > -\fIdeactivate\fP > +\fIdeactivate\fP [\fIinstance=<number>\fP] > .br > > Deactivates Serial Over LAN mode on the BMC. > @@ -2625,6 +2628,9 @@ > this command to be sent to the BMC, but in the case of an > unintentional exit from SOL mode, this command may be > necessary to reset the state of the BMC. > + > +If the instance is given, it will deactivate the given instance > +number. The default is 1. > .RE > .TP > \fIspd\fP <\fBi2cbus\fR> <\fBi2caddr\fR> [<\fBchannel\fR>] > [<\fmaxread\fR>] > Index: lib/ipmi_sol.c > =================================================================== > RCS file: /cvsroot/ipmitool/ipmitool/lib/ipmi_sol.c,v > retrieving revision 1.62 > diff -u -r1.62 ipmi_sol.c > --- lib/ipmi_sol.c 18 Jan 2013 12:37:27 -0000 1.62 > +++ lib/ipmi_sol.c 22 Mar 2013 13:33:42 -0000 > @@ -1292,7 +1292,7 @@ > * ipmi_sol_deactivate > */ > static int > -ipmi_sol_deactivate(struct ipmi_intf * intf) > +ipmi_sol_deactivate(struct ipmi_intf * intf, int instance) > { > struct ipmi_rs * rsp; > struct ipmi_rq req; > @@ -1305,8 +1305,8 @@ > req.msg.data = data; > > bzero(data, sizeof(data)); > - data[0] = IPMI_PAYLOAD_TYPE_SOL; /* payload type */ > - data[1] = 1; /* payload instance. Guess! */ > + data[0] = IPMI_PAYLOAD_TYPE_SOL; /* payload type */ > + data[1] = instance; /* payload instance. */ > > /* Lots of important data */ > data[2] = 0; > @@ -1533,7 +1533,7 @@ > * ipmi_sol_red_pill > */ > static int > -ipmi_sol_red_pill(struct ipmi_intf * intf) > +ipmi_sol_red_pill(struct ipmi_intf * intf, int instance) > { > char * buffer; > int numRead; > @@ -1679,7 +1679,7 @@ > { > lprintf(LOG_ERR, "Error: No response to keepalive - > Terminating session"); > /* attempt to clean up anyway */ > - ipmi_sol_deactivate(intf); > + ipmi_sol_deactivate(intf, instance); > exit(1); > } > > @@ -1689,7 +1689,7 @@ > exit(1); > } > else > - ipmi_sol_deactivate(intf); > + ipmi_sol_deactivate(intf, instance); > > return 0; > } > @@ -1701,7 +1701,8 @@ > * ipmi_sol_activate > */ > static int > -ipmi_sol_activate(struct ipmi_intf * intf, int looptest, int > interval) > +ipmi_sol_activate(struct ipmi_intf * intf, int looptest, int > interval, > + int instance) > { > struct ipmi_rs * rsp; > struct ipmi_rq req; > @@ -1737,7 +1738,7 @@ > req.msg.data = data; > > data[0] = IPMI_PAYLOAD_TYPE_SOL; /* payload type */ > - data[1] = 1; /* payload instance */ > + data[1] = instance; /* payload instance */ > > /* Lots of important data. Most is default */ > data[2] = bSolEncryption? 0x80 : 0; > @@ -1843,7 +1844,7 @@ > > if(looptest == 1) > { > - ipmi_sol_deactivate(intf); > + ipmi_sol_deactivate(intf, instance); > usleep(interval*1000); > return 0; > } > @@ -1854,7 +1855,7 @@ > * 1) STDIN for user input > * 2) The FD for incoming SOL packets > */ > - if (ipmi_sol_red_pill(intf)) > + if (ipmi_sol_red_pill(intf, instance)) > { > lprintf(LOG_ERR, "Error in SOL session"); > return -1; > @@ -1874,8 +1875,8 @@ > lprintf(LOG_NOTICE, "SOL Commands: info [<channel number>]"); > lprintf(LOG_NOTICE, " set <parameter> <value> > [channel]"); > lprintf(LOG_NOTICE, " payload > <enable|disable|status> > [channel] [userid]"); > - lprintf(LOG_NOTICE, " activate > [<usesolkeepalive|nokeepalive>]"); > - lprintf(LOG_NOTICE, " deactivate"); > + lprintf(LOG_NOTICE, " activate > [<usesolkeepalive|nokeepalive>] [instance=<number>]"); > + lprintf(LOG_NOTICE, " deactivate > [instance=<number>]"); > lprintf(LOG_NOTICE, " looptest [<loop times>] > [<loop > interval(in ms)>]"); > } > > @@ -2029,32 +2030,60 @@ > * Activate > */ > else if (!strncmp(argv[0], "activate", 8)) { > + int i; > + unsigned int instance = 1; > > - if (argc > 2) { > - print_sol_usage(); > - return -1; > - } > - > - if (argc == 2) { > - if (!strncmp(argv[1], "usesolkeepalive", 15)) > + for (i = 1; i < argc; i++) { > + if (!strncmp(argv[i], "usesolkeepalive", 15)) > _use_sol_for_keepalive = 1; > - else if (!strncmp(argv[1], "nokeepalive", 11)) > + else if (!strncmp(argv[i], "nokeepalive", 11)) > _disable_keepalive = 1; > - else { > + else if (!strncmp(argv[i], "instance=", 9)) { > + char *end; > + instance = strtoul(argv[i] + 9, &end, 0); > + if (*end != 0 || instance == 0 || instance > 15) > + { > + lprintf(LOG_ERR, > + "instance invalid: '%s'", > + argv[i] + 9); > + print_sol_usage(); > + return -1; > + } > + } else { > print_sol_usage(); > return -1; > } > } > - retval = ipmi_sol_activate(intf, 0, 0); > + retval = ipmi_sol_activate(intf, 0, 0, instance); > } > > > /* > * Dectivate > */ > - else if (!strncmp(argv[0], "deactivate", 10)) > - retval = ipmi_sol_deactivate(intf); > - > + else if (!strncmp(argv[0], "deactivate", 10)) { > + int i; > + unsigned int instance = 1; > + > + for (i = 1; i < argc; i++) { > + if (!strncmp(argv[i], "instance=", 9)) { > + char *end; > + instance = strtoul(argv[i] + 9, &end, 0); > + if (*end != 0 || instance == 0 || instance > 15) > + { > + lprintf(LOG_ERR, > + "instance invalid: '%s'", > + argv[i] + 9); > + print_sol_usage(); > + return -1; > + } > + } else { > + print_sol_usage(); > + return -1; > + } > + } > + retval = ipmi_sol_deactivate(intf, instance); > + } > > /* > * SOL loop test: Activate and then Dectivate > @@ -2083,7 +2112,7 @@ > while (cnt > 0) > { > printf("remain loop test counter: %d\n", cnt); > - retval = ipmi_sol_activate(intf, 1, interval); > + retval = ipmi_sol_activate(intf, 1, interval, 1); > if (retval) > { > printf("SOL looptest failed: %d\n", retval); > > > > ------------------------------------------------------------------------------ > Everyone hates slow websites. So do we. > Make your web apps faster with AppDynamics > Download AppDynamics Lite for free today: > http://p.sf.net/sfu/appdyn_d2d_mar > _______________________________________________ > Ipmitool-devel mailing list > Ipmitool-devel@lists.sourceforge.net > <mailto:Ipmitool-devel@lists.sourceforge.net> > https://lists.sourceforge.net/lists/listinfo/ipmitool-devel > > ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_mar _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
