On Tue, Sep 17, 2013 at 6:57 PM, Siegel, Jeffrey <jeffrey.sie...@spirent.com> wrote: > I have a micro-TCA chassis with an MCH made by NAT Gmbh. I use ipmitool over > LAN to talk to the MCH, and other cards in the chassis. > > This command allows me to read the sensor data from the card in slot AMC7: > > $ ./ipmitool.exe -H 10.168.0.3 -P "" -T 0x82 -B 0 -t 0x7e -b 7 sensor >
Hello Jeffrey, there were some changes related to bridging. You might want to follow on those. I can't help you further than that. Good luck and best regards, Z. > For ipmitool version 1.8.11, the output is: > > > > jsiegel@EAT-DXY4FS1 /cygdrive/c/Users/jsiegel/ipmitool/ipmitool-1.8.11/src > > $ ./ipmitool.exe -H 10.168.0.3 -P "" -T 0x82 -B 0 -t 0x7e -b 7 sensor > > B3:IPMI Info-1 | 0x0 | discrete | 0x0080| na | na | > na | na | na | na > > B3:IPMI Info-2 | 0x0 | discrete | 0x0080| na | na | > na | na | na | na > > B3:IPMI Watchdog | 0x0 | discrete | 0x0080| na | na | > na | na | na | na > > B3:FRU Agent | 0x0 | discrete | 0x0180| na | na | > na | na | na | na > > B3:Health Error | 0x0 | discrete | 0x0180| na | na | > na | na | na | na > > B3:MMC Reboot | 0x0 | discrete | 0x0180| na | na | > na | na | na | na > > B3:Ver change | 0x0 | discrete | 0x0080| na | na | > na | na | na | na > > B3:ModuleHotSwap | 0x0 | discrete | 0x0180| na | na | > na | na | na | na > > B3:IPMBL State | 0x88 | discrete | 0x0880| na | na | > na | na | na | na > > B3:Storage Err | 0x0 | discrete | 0x0080| na | na | > na | na | na | na > > B3:Board Reset | 0x0 | discrete | 0x0080| na | na | > na | na | na | na > > B3:Temp CPU | 47.000 | degrees C | ok | -10.000 | -7.000 | > -5.000 | 90.000 | 100.000 | 110.000 > > B3:Temp CPU In | 36.000 | degrees C | ok | -10.000 | -7.000 | > -5.000 | 80.000 | 90.000 | 95.000 > > B3:Temp CPU Out | 39.000 | degrees C | ok | -10.000 | -7.000 | > -5.000 | 90.000 | 100.000 | 105.000 > > B3:Temp AMC In | 35.000 | degrees C | ok | -10.000 | -7.000 | > -5.000 | 70.000 | 80.000 | 85.000 > > B3:Temp AMC Out | 42.000 | degrees C | ok | -10.000 | -7.000 | > -5.000 | 80.000 | 90.000 | 95.000 > > B3:Board 3.3vIPM | 3.265 | Volts | ok | na | 3.111 | > na | na | 3.511 | na > > B3:Board 12.0v | 11.977 | Volts | ok | na | 10.738 | > na | na | 13.393 | na > > B3:Board 5.0V | 5.099 | Volts | ok | na | 4.666 | > na | na | 5.360 | na > > B3:Board 3.3V | 3.326 | Volts | ok | na | 3.111 | > na | na | 3.511 | na > > B3:Board 1.8V | 1.823 | Volts | ok | na | 1.686 | > na | na | 1.931 | na > > B3:Board 1.1V | 1.107 | Volts | ok | na | 1.029 | > na | na | 1.166 | na > > B3:Board Vtt0.9V | 0.921 | Volts | ok | na | 0.833 | > na | na | 0.980 | na > > B3:Pwr Good | 0x0 | discrete | 0x979a| na | na | > na | na | na | na > > B3:Pwr Good Evt | 0x0 | discrete | 0x979a| na | na | > na | na | na | na > > B3:CPU Status | 0x0 | discrete | 0x0080| na | na | > na | na | na | na > > B3:FWH0 Boot Err | 0x0 | discrete | 0x0080| na | na | > na | na | na | na > > B3:FWH1 Boot Err | 0x0 | discrete | 0x0080| na | na | > na | na | na | na > > B3:POST Value | 0x0 | discrete | 0x0080| na | na | > na | na | na | na > > B3:Lan Front0 Lk | 0x0 | discrete | 0x0180| na | na | > na | na | na | na > > B3:Lan Front1 Lk | 0x0 | discrete | 0x0180| na | na | > na | na | na | na > > B3:Lan AMC0 Link | 0x0 | discrete | 0x0180| na | na | > na | na | na | na > > B3:Lan AMC1 Link | 0x0 | discrete | 0x0180| na | na | > na | na | na | na > > > > For ipmitool version 1.8.12 or 1.8.13, the command no longer works properly: > > jsiegel@EAT-DXY4FS1 /cygdrive/c/Users/jsiegel/ipmitool/ipmitool-1.8.13/src > > $ ./ipmitool.exe -H 10.168.0.3 -P "" -T 0x82 -B 0 -t 0x7e -b 7 sensor > > B3:IPMI Info-1 | na | discrete | na | na | na | > na | na | na | na > > B3:IPMI Info-2 | na | discrete | na | na | na | > na | na | na | na > > B3:IPMI Watchdog | na | discrete | na | na | na | > na | na | na | na > > B3:FRU Agent | na | discrete | na | na | na | > na | na | na | na > > B3:Health Error | na | discrete | na | na | na | > na | na | na | na > > B3:MMC Reboot | na | discrete | na | na | na | > na | na | na | na > > B3:Ver change | na | discrete | na | na | na | > na | na | na | na > > B3:ModuleHotSwap | na | discrete | na | na | na | > na | na | na | na > > B3:IPMBL State | na | discrete | na | na | na | > na | na | na | na > > B3:Storage Err | na | discrete | na | na | na | > na | na | na | na > > B3:Board Reset | na | discrete | na | na | na | > na | na | na | na > > B3:Temp CPU | na | | na | na | na | > na | na | na | na > > B3:Temp CPU In | na | | na | na | na | > na | na | na | na > > B3:Temp CPU Out | na | | na | na | na | > na | na | na | na > > B3:Temp AMC In | na | | na | na | na | > na | na | na | na > > B3:Temp AMC Out | na | | na | na | na | > na | na | na | na > > B3:Board 3.3vIPM | na | | na | na | na | > na | na | na | na > > B3:Board 12.0v | na | | na | na | na | > na | na | na | na > > B3:Board 5.0V | na | | na | na | na | > na | na | na | na > > B3:Board 3.3V | na | | na | na | na | > na | na | na | na > > B3:Board 1.8V | na | | na | na | na | > na | na | na | na > > B3:Board 1.1V | na | | na | na | na | > na | na | na | na > > B3:Board Vtt0.9V | na | | na | na | na | > na | na | na | na > > B3:Pwr Good | na | discrete | na | na | na | > na | na | na | na > > B3:Pwr Good Evt | na | discrete | na | na | na | > na | na | na | na > > B3:CPU Status | na | discrete | na | na | na | > na | na | na | na > > B3:FWH0 Boot Err | na | discrete | na | na | na | > na | na | na | na > > B3:FWH1 Boot Err | na | discrete | na | na | na | > na | na | na | na > > B3:POST Value | na | discrete | na | na | na | > na | na | na | na > > B3:Lan Front0 Lk | na | discrete | na | na | na | > na | na | na | na > > B3:Lan Front1 Lk | na | discrete | na | na | na | > na | na | na | na > > B3:Lan AMC0 Link | na | discrete | na | na | na | > na | na | na | na > > B3:Lan AMC1 Link | na | discrete | na | na | na | > na | na | na | na > > > > No sensor values are retrieved. I have taken Wireshark traces of the working > and non-working conditions and can supply the pcapng files if desired. > Picking through the packets, it seems the problem is in the request being > sent: > > > > Good/Working Request > > Data > > Tracking: Track Request, Channel: IPMB-L (0x07) > > 01.. .... = Tracking: Track Request (0x01) > > ..0. .... = Encryption required: False > > ...0 .... = Authentication required: False > > .... 0111 = Channel: IPMB-L (0x07) > > Req, Get Sensor Reading, seq 0x1d > > [Response in: 197] > > Header: Get Sensor Reading (Request) from 0x20 to 0x7e > > Target Address: 0x7e > > Target LUN: 0x00, NetFN: Sensor/Event Request (0x04) > > .... ..00 = Target LUN: 0x00 > > 0001 00.. = NetFn: Sensor/Event Request (0x04) > > Header checksum: 0x72 (correct) > > Source Address: 0x20 > > Source LUN: 0x00, SeqNo: 0x1d > > .... ..00 = Source LUN: 0x00 > > 0111 01.. = Sequence Number: 0x1d > > Command: Get Sensor Reading (0x2d) > > Data > > Sensor Number: 16 > > > > Bad/Non-working request > > Data > > Tracking: Track Request, Channel: Primary IPMB (IPMB-0) > (0x00) > > 01.. .... = Tracking: Track Request (0x01) > > ..0. .... = Encryption required: False > > ...0 .... = Authentication required: False > > .... 0000 = Channel: Primary IPMB (IPMB-0) (0x00) > > Req, Get Sensor Reading, seq 0x20 > > [No corresponding response] > > Header: Get Sensor Reading (Request) from 0x20 to 0x7e > > Target Address: 0x7e > > Target LUN: 0x00, NetFN: Sensor/Event Request (0x04) > > .... ..00 = Target LUN: 0x00 > > 0001 00.. = NetFn: Sensor/Event Request (0x04) > > Header checksum: 0x72 (correct) > > Source Address: 0x20 > > Source LUN: 0x00, SeqNo: 0x20 > > .... ..00 = Source LUN: 0x00 > > 1000 00.. = Sequence Number: 0x20 > > Command: Get Sensor Reading (0x2d) > > Data > > Sensor Number: 16 > > > > Any suggestions? > > > > Regards, > > Jeff > > E-mail confidentiality. > -------------------------------- > This e-mail contains confidential and / or privileged information belonging > to Spirent Communications plc, its affiliates and / or subsidiaries. If you > are not the intended recipient, you are hereby notified that any disclosure, > copying, distribution and / or the taking of any action based upon reliance > on the contents of this transmission is strictly forbidden. If you have > received this message in error please notify the sender by return e-mail and > delete it from your system. > > Spirent Communications plc > Northwood Park, Gatwick Road, Crawley, West Sussex, RH10 9XN, United > Kingdom. > Tel No. +44 (0) 1293 767676 > Fax No. +44 (0) 1293 767677 > > Registered in England Number 470893 > Registered at Northwood Park, Gatwick Road, Crawley, West Sussex, RH10 9XN, > United Kingdom. > > Or if within the US, > > Spirent Communications, > 26750 Agoura Road, Calabasas, CA, 91302, USA. > Tel No. 1-818-676- 2300 > > ------------------------------------------------------------------------------ > LIMITED TIME SALE - Full Year of Microsoft Training For Just $49.99! > 1,500+ hours of tutorials including VisualStudio 2012, Windows 8, SharePoint > 2013, SQL 2012, MVC 4, more. BEST VALUE: New Multi-Library Power Pack > includes > Mobile, Cloud, Java, and UX Design. Lowest price ever! Ends 9/20/13. > http://pubads.g.doubleclick.net/gampad/clk?id=58041151&iu=/4140/ostg.clktrk > _______________________________________________ > Ipmitool-devel mailing list > Ipmitool-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ipmitool-devel > ------------------------------------------------------------------------------ LIMITED TIME SALE - Full Year of Microsoft Training For Just $49.99! 1,500+ hours of tutorials including VisualStudio 2012, Windows 8, SharePoint 2013, SQL 2012, MVC 4, more. BEST VALUE: New Multi-Library Power Pack includes Mobile, Cloud, Java, and UX Design. Lowest price ever! Ends 9/20/13. http://pubads.g.doubleclick.net/gampad/clk?id=58041151&iu=/4140/ostg.clktrk _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
