Text specifying the appropriate behavior (as Steve describes) on the part of DHCP servers will be added to the next rev of the DHCPv6 spec...
- Ralph At 01:02 PM 3/18/2002 -0800, Steve Deering wrote: >At 3:23 PM +0100 3/17/02, Alberto Escudero-Pascual wrote: > >(MUST, SHOULD) the (stateful) addresses provided by a DHCPv6 have the "u" > >bit to 0 as manual configuration? > >If the address provided by the DHCP server contains the modified EUI-64 >value generated from an IEEE 802 or EUI-64 address belonging to the >requesting node, it should have the "u" bit set to one; otherwise, >it should be set to zero. > >Steve > >-------------------------------------------------------------------- >IETF IPng Working Group Mailing List >IPng Home Page: http://playground.sun.com/ipng >FTP archive: ftp://playground.sun.com/pub/ipng >Direct all administrative requests to [EMAIL PROTECTED] >-------------------------------------------------------------------- -------------------------------------------------------------------- IETF IPng Working Group Mailing List IPng Home Page: http://playground.sun.com/ipng FTP archive: ftp://playground.sun.com/pub/ipng Direct all administrative requests to [EMAIL PROTECTED] --------------------------------------------------------------------
