Speaking of BCP38 and the SUP720's, are there any documents anyplace that take the limitations into consideration, and provide some configuration info and best practices for setting up the SUP720's? We have multiple transit points, and currently use a 6509/SUP720-3BXL to talk to out transit/peers as we are for the most part an Ethernet based network internally at this point in time, plus we have run dual-stack for a while. So I am very open to any information/references that would help me improve my network so we are never the cause/source of any spoofed attacks over IPv4 or IPv6..
--- Howard Leadmon > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On > Behalf Of Nick Hilliard > Sent: Thursday, March 28, 2013 7:04 AM > To: Mike Jones > Cc: [email protected] list > Subject: Re: BCP38 is not just for IPv4 > > On 28/03/2013 11:01, Mike Jones wrote: > > To throw a small data point out there, I have had several server/VPS > > providers who all (but one) performed filtering on v4, but nearly all > > forgot it with v6 (some have since done it). > > As always, beware hardware limitations (i.e. looking at sup720 / rsp720 in > particular). ACLs only for ipv6 urpf on this platform. > > Nick
