On 5/21/13 9:25 AM, Tim Chown wrote:
On 21 May 2013, at 13:26, Nick Hilliard <[email protected]
<mailto:[email protected]>> wrote:
On 21/05/2013 13:00, Liviu Pislaru wrote:
With DHCPv6 i didn't find a way to do that (identify what IPv6 is
allocated
to which customer) without asking any additional information from the
customer (like DUID).
apparently this is a feature, not a bug.
There is this, which allows a relay to insert the client hardware address:
http://tools.ietf.org/html/draft-halwasia-dhc-dhcpv6-hardware-addr-opt-01
Seems to have expired though :/
Tim
See this one:
http://tools.ietf.org/html/rfc6939
Internet Engineering Task Force (IETF) G. Halwasia
Request for Comments: 6939 S. Bhandari
Category: Standards Track W. Dec
ISSN: 2070-1721 Cisco Systems
May 2013
Client Link-Layer Address Option in DHCPv6
Abstract
This document specifies the format and mechanism that is to be used
for encoding the client link-layer address in DHCPv6 Relay-Forward
messages by defining a new DHCPv6 Client Link-Layer Address option.
[...]
