UNCLASSIFIED I'm hitting ctrl+b at the first prompt because that's the only one I get. After that the screen goes blank and then the devices in the boot order attempt to boot.
I'm doing this on a HP Z400 which has a HP branded BIOS. The network card definitely appears in the boot order selection with the stock Intel pxe rom, but when I replace it with iPXE it disappears. The BIOS detection line: iPXE (http://ipxe.org) 37:09.0 1000 PCI3.00 PnP PMM+004D1200+004E1EF0 D740 Cheers Andrew Dwyer -----Original Message----- From: Michael Brown [mailto:[email protected]] Sent: Thursday, 17 February 2011 2:51 PM To: [email protected] Cc: Dwyer, Andrew Subject: Re: [ipxe-devel] Create rom image with embedded script [SEC=UNCLASSIFIED] On Thursday 17 Feb 2011 01:03:44 Andrew Dwyer wrote: > Following on from my previous message, I've flashed a rom built from > the iPXE trunk onto an Intel Pro 1000 GT card. When I boot the > machine the iPXE prompt appears during the BIOS boot messages and > before any of the devices in the boot order (I don't actually see > iPXE as an option in the BIOS boot order menu). If I hit ctrl+B and > sanboot an image over iSCSI that I previously created with gPXE my computer crashes. > > Does anyone have any ideas? Are you pressing Ctrl-B at the "...to configure iPXE" prompt, or the "...for the iPXE command line" prompt? If the former, then it's unsurprising that sanbooting doesn't work; at this stage your computer has not yet completed POST, and the OS is likely to die because (for example) the system memory map may not yet be initialised. :) (The "...to configure iPXE" prompt is intended for users who need to change non-volatile stored options, rather than for booting. We deliberately don't prevent the user from attempting to boot, since there exist some situations in which it's an extremely useful way to rescue an otherwise-unbootable system, but in general you shouldn't expect booting to work at this "...to configure iPXE" point.) So, assuming this is the case, the real question is then why it doesn't show up as a boot option. Could you post the whole of the BIOS detection line (the line immediately before "Press Ctrl-B to configure iPXE")? Thanks, Michael IMPORTANT: This email remains the property of the Department of Defence and is subject to the jurisdiction of section 70 of the Crimes Act 1914. If you have received this email in error, you are requested to contact the sender and delete the email. _______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo/ipxe-devel
