On Wednesday 02 Mar 2011 23:24:29 Scott Classen wrote: > >> any ideas why it's trying to open some device at http://ipxe.org ??? > > > > It isn't. It's trying to direct _you_ to look at > > http://ipxe.org/2c0d603b , where you will find some hopefully helpful > > suggestions relating to the specific problem you are seeing, along with a > > link to the exact line of the iPXE source code that is generating that > > specific error. > > duh! Thanks for the pointer > OK I'm now looking at my Netapp while the iPXE machine is booting and > I see the following error: > > Wed Mar 2 15:17:10 PST [mynetappfiler: iscsi.loginFailure:warning]: > ISCSI: iSCSI login failure, 'Invalid TargetName > iqn.2010-11.com.big.samos' > > but if I do an igroup show an my Netapp I see that it is a valid Target: > > netapp*> igroup show > iqn.2010-11.com.big.samos (not logged in) > > I'll continue to mess around with it, but it looks like some sort of > formatting or communication problem between the iPXE iSCSI initator > and the NetApp.
I think it's most likely to be either an ACL on the NetApp box (with a misleading "Invalid TargetName" error message meaning "Invalid Target for this Initiator"), or possibly NetApp is sulking because the usual (but technically optional) ":xxxxxxxx" trailing portion of the iSCSI IQN is missing. When you find out what causes it, please feel free to update http://ipxe.org/2c0d603b with some helpful NetApp-specific hints. :) Michael _______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo/ipxe-devel
