Hi folks
Other question has to do with iSCSI boots. I have a number of
operational iSCSI servers. Targets are alive and visible. I can attach
to them.
What I can't do is seem to convince ipxe to attach to them. sanhook
and sanboot fail. I get some log indications that things were starting
to go when it bailed.
From my logs (using scst and iscsi-scst)
May 10 23:13:09 crunch-r kernel: [682005.115635] iscsi-scst: Negotiated
parameters: InitialR2T Yes, ImmediateData No, Ma
xConnections 1, MaxRecvDataSegmentLength 1048576,
MaxXmitDataSegmentLength 8192,
May 10 23:13:09 crunch-r kernel: [682005.115644] iscsi-scst:
MaxBurstLength 262144, FirstBurstLength 65536, DefaultT
ime2Wait 0, DefaultTime2Retain 0,
May 10 23:13:09 crunch-r kernel: [682005.115650] iscsi-scst:
MaxOutstandingR2T 1, DataPDUInOrder Yes, DataSequenceIn
Order Yes, ErrorRecoveryLevel 0,
May 10 23:13:09 crunch-r kernel: [682005.115657] iscsi-scst:
HeaderDigest None, DataDigest None, OFMarker No, IFMark
er No, OFMarkInt 2048, IFMarkInt 2048
May 10 23:13:09 crunch-r kernel: [682005.115665] iscsi-scst: Target
parameters set for session 1176e23270040: QueuedComm
ands 32, Response timeout 30, Nop-In interval 30
May 10 23:13:10 crunch-r kernel: [682005.353412] iscsi-scst:
***ERROR***: Connection with initiator iqn.2010-04.org.ipxe
:36168950-879f-4d56-8263-6bf5b4c63c11 unexpectedly closed!
Not sure what the error is about, other than the initiator closing.
Any hints as to how/where to debug? I'd really like to set up the iso
booting at some point.
Thanks!
Joe
--
Joseph Landman, Ph.D
Founder and CEO
Scalable Informatics, Inc.
email: [email protected]
web : http://scalableinformatics.com
http://scalableinformatics.com/sicluster
phone: +1 734 786 8423 x121
fax : +1 866 888 3112
cell : +1 734 612 4615
_______________________________________________
ipxe-devel mailing list
[email protected]
https://lists.ipxe.org/mailman/listinfo/ipxe-devel
