Yes. This comes off a VM running on a Xen 3.1.2 system from about 2007. I've tested with Xen 3.4.3, and 4.1.1 and do not have this issue. Unfortunately, the infrastructure that I need to deploy is on the older system and it will not be upgraded any time soon.
Line 1 of the main program prints the "initialising devices ..." message, which doesn't get displayed. So I'm guessing that either: 1) the older IsoLinux has trouble and doesn't really load ipxe.krn, or 2) there is something in the older Xen's emulation of the console that is causing a problem. In either case it doesn't look like I'll get any debugging information from the console.
On 10/3/2011 11:48, Charles Watt wrote: >/ I've pulled and built the top of the tree and tested the ipxe.iso on
/> >/ numerous physical servers, VMware, KVM, HyperV, and Citrix XenServer, /> >/ all with success. But when booted on an OpenSource Xen VM (in KVM /> >/ mode) it appears to hang at the "Loading ipxe.krn .......... Ready." /> >/ line (see attached image). Then after a few seconds the VM halts. /> >/
/>/ Can anyone give me some suggestions on where to look? What modules
/> >/ should I recompile with DEBUG? />
That message is from Syslinux (ISOLINUX, specifically). It looks like your Syslinux is pretty old. Would you consider upgrading it? - Shao Miller
------------------------------------------------------------------------
_______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo/ipxe-devel
