On 29.05.2012 11:35, Rafael Gómez Torres wrote: > Hello Very good; > > I have an HP Compaq d530 card with a Broadcom NetXtreme > Gigabit ethernetcontroller - bcm5782 that can not boot with ipxe, I > tried to create the rom to the card in concrete > and these parameters would make bin/14e41696rom and gives me an error > "there is no rule to make the object ", I'm a little lost I could give a > solution.
You should try to boot from CD or USB stick before you try and build a ROM. Build ipxe.iso and/or ipxe.usb and burn/transfer to a CD or USB-stick. When you have that CD/USB (see docs on http://ipxe.org/download) you need to boot from it and verify that your hardware is working. I'm assuming that you have tested that your card works as it should in Linux? -- Robin _______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
