Hi Owner, Who can help me?I eagerly waitting for ipxe team reply,if you need any infomation,please let me know. I have debug this issue more than one week,but i can't find the root cause,my deubg information like following figure. The call flow is efipci_supported()->efipci_create()->OpenProtocol(),unfortunately,OpenProtocol return EFI_UNSUPPORTED error code and the log is "EFIPCI device 0x3dbf5398 is not a PCI device",I think ipxe can't enum the pci device.Could you tell me the right step or ut pass machine. I get the faile result after boot ipxe via uefi shell on Thinkpad T420 and VMare 8.0,it's network device is intel. BTW,Could you tell me whether ipxe is supported in uefi enviroment,if not,could you tell me your plan.
------------------ Best Regards,Daniel Li ------------------ ???????? ------------------ ??????: "????????????"<[email protected]>; ????????: 2012??9??7??(??????) ????9:37 ??????: "ipxe-devel"<[email protected]>; ????: IPXE question: iPXE.efi can't detect network device Dear IPXE owner, Thanks for ipxe develop team hard work,after read ipxe code ,i found that ipxe code is very classic and helpful to me. Our product will import ipxe,but efi file can't found network device,I built efi file according to the below steps. 1.I have undef PXE_STACK and PXE_MENU in src\config\general.h. 2.Built EFI version as vendor/product specific: $ make bin-x86-64/10222000.efi bin-x86-64/10222001.efi bin-x86-64/10222625.efi.(computer vendor is 1022 ,device id is 2001). $make bin-x86-64-efi/80861502(computer vendor is 8086,device id is 1502). 3.insert usb drive and enter uefi shell. 4.fs0: 5.run above efi file. 6.All commands are Show the tip "No more network devices". My built enviroment like following: OS:ubuntu 12 GCC:4.6 ------------------ ???????? ------------------ ??????: "Anton D. Kachalov"<[email protected]>; ????????: 2012??9??6??(??????) ????10:18 ??????: "????"<[email protected]>; "ipxe-devel"<[email protected]>; ????: Re: PXE question: iPXE.efi can't detect network device Hello. It's better to address this question directly to the [email protected] mailing list. Michael Brown should be right person. BTW, ipxe.iso is legacy bootable ISO image and it contains all supported network drivers including pcnet32. Try to build EFI version as vendor/product specific: $ make bin-x86-64/10222000.efi bin-x86-64/10222001.efi bin-x86-64/10222625.efi One of them should work. Please pay attention that EFI environment doesn't support PXE stack. You have to disable PXE_STACK and PXE_MENU in the config file. 06.09.2012, 17:32, "????" <[email protected]>: Dear Anton, I have built ipxe.efi 64 bit,my network device card is pcnet32,but ipxe.efi can't attach network card,i only get the log "No more network devices".but if boot to ipxe via ipxe.iso,ipxe can detected the network device card. We will add ipxe to our project,so I hurry to solve this problem. BTW, After debug ipxe.efi,i found that only call efi_pci.c\efipci_driver_startup but not call efi_pci.c\efipci_start,so i think pci device not been attach,do you know that what time to call function efipci_start(). Although I have read a topic about "Using iPXE with UNDI driver",but i can't find the root cause,Do you know the root cause?? Thank you very much. I have built via run command "make bin-x86-64/ipxe.efi DEBUG:efi_pci device,pci" and then run ipxe.efi, unfortunately,the result like following figure,it means can't attach any pci device,do you know why?
[email protected]
Description: Binary data
_______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
